An option that I would like to use with Phone Tools is the answering machine. I tried to use it. I recorded a new greeting message and set all the options the way that I wanted them. However, whenever I call the phone line that the answering machine would be responding to, it never picks up the phone. Instead, I always get the message to pick up the phone on my screen. Why won't the answering machine work? Is there a way of setting how many rings it waits for until picking up the phone?
It is a simple program and not too powerful. I replaced mine with Rapid Com Voice that came with a modem I bought.
Yes there is a place to set number of rings as well as other settings. Unfortunately, I don't recall where it is. I remember the interface is not too good... Try its Help File
to find the number of rings before pickup open phone tools: go to configure>general configuration>communication tab and you will see "# of rings before pickup". i've set mine at 2 which is less than my regular answering machine. i hope this helps.
couple of things to remember when you want to use phone tools:
1. you must be offline (not on the internet).
2. phone tools program must be open and activated (status must read RDY in green, not Stby (standby) in orange).
3. finally click the Voice Mail button and make sure the Answering Machine is turned on (a green light next to "Greeting and Record").
i hope this helps. let me know.
wlls
So, then: The program Won't work if I'm connected, right? Please confirm. I've set up the Voice Mail, which doesn't kick in. I'm also on line (cable modem) +/- 24/7. Modem type is telephony, v.92.
I thought I remembered that the Fax program worked when I was On line on my old machine; that was a couple of years ago. Back then, though, I'd normally switch off the computer when I left the house and could well be confused.
I'd also Bought the latest version of Classic Phone Tools before deciding to get a new computer, which came with the program installed. Have more or less decided to tell my card co. to reverse the transaction and look for something better. Which one do you suggest?
Jim Hardin
2 Intern
•
2053 Posts
532
0
Posted April 30th, 2000 11:00
Yes there is a place to set number of rings as well as other settings. Unfortunately, I don't recall where it is. I remember the interface is not too good... Try its Help File