Device Mgr. error after replacing Me OS with Win2K Professional
I formatted my hard drive and replaced the original Windows Millenium OS with Windows 2000 Professional. I have a Dell Dimension 8100 that's approx 2 yrs old. Everything works fine but I have the following situation. When I open up Device Manager, I have one lonely yellow question mark next to "Other Devices". Directly under that it states "Unknown Device". When I right-click on it it states:
Device Type: Manufacturer Unknown Location on Microsoft ACPI-Compliant System
The drivers for this device are not loaded (code 28)
I have provided my system configuration to Dell's website and in turn downloaded a chipset driver, installed it, rebooted and with no luck. I have also uninstalled it, rebooted and had the system search for drivers with no luck. I have pointed the system to the Win2K CD in search for drivers and in desperation to the Millenium CD with no luck.The "device" is currently disabled. The system works fine and I could ignore the "problem" but it bothers me to have it that way. Dell has no advice to give except to speak with a tech for a fee. I will not do that, especially since I haven't found anyone who seems to know anything beyond what I've been told.
Any suggestions would be GREATLY appreciated. Thanks.
Message Edited by He_thinks_who_he_is on 04-01-2004 04:07 PM
Your suggestion fixed the device manager problem but now I have a different problem. When I boot up each time I get a Service dialogue box that states:
" Windows cannot connect to the E-Support button hardware. You can still access E-Support by double clicking the desktop icon. If restarting the system does not clear this problem, you can repair it with E-Support.
Detail: CreateInstanceEnum() Failed"
Dell no longer has Resolution Assistant, they combined everything, so the fix they give doesn't apply any more. They recommended adding a Set Path statement in the AUTOEXEC.BAT file, pointing to a Resolution folder that is not there in later releases.
Do you know of any fixes for this or should I post this to the forum?
Denny Denham
2 Intern
•
18798 Posts
225
0
Posted April 1st, 2004 21:00
That entry is described here. The corrective procedure is in this post.