UNSOLVED

Armstrong1

updated

15 years ago

0

2153

February 9th, 2012 03:00

Step by Step Procedure to Config Pool in VNX 5700 for both Block and File

Step by Step Procedure to Config Pool in VNX 5700 for both Block and File

  • kelleg

    6 Operator

    •

    4537 Posts

    424

    0

    Posted February 13th, 2012 09:00

    Have you looked at the Best Practices guides for VNX? These can all be found on PowerLink at the following location:

    Home > Products > Hardware/Platforms > VNX Family > White Papers

    EMC Unified Storage Best Practices for Performance and Availability - Common Platform and Block Storage 31.5 — Applied Best Practices.pdf

    EMC Unified Storage System Fundamentals for Performance and Availability.pdf

    EMC VNX Virtual Provisioning — Applied Technology .pdf

    glen

  • StuartA58

    2 Intern

    •

    138 Posts

    424

    0

    Posted March 5th, 2012 14:00

    These are good white papers!

  • SanMan386

    29 Posts

    424

    0

    Posted March 10th, 2012 13:00

    IMHO you can run CIFS out of your common, multi-tier pool, if you do not have a LOT of CIFS data.  Sure a lot is ambiguous, sorry.  I believe the "correct" way is to dedicate spindles to file, but it is not a hard requirement.  I carve file up out of my "block" pool for smaller deployments all the time.  If you decide you want to, simply carve up pairs of LUNs to make up the total you need.  I peg mine to the lowest tier, NL-SAS, during creation and then set them to "No Data Movement".  You then add each LUN to each SP, so if you wanted 100G file system, then carve two 50G LUNs and put one on SPA and one on SPB.  Then add the LUNs to the ~filestorage Storage Group.  Once that is done, you can go to "Storage / Storage Pools for File", then click on the wizard on the right "Rescan Storage Systems".  This makes the LUNs you created avail for File.  Then create a filesystem, CIFS server, and CIFS share.  BTW, if you ever plan to replicate the CIFS data, make sure you create a virtual data mover (VDM) as this is necessary to replicate the environment.  Hope this helps.