I have the same issue with error code 0x6500061... I select an IP of another server on the same SP of the destination VNXe and it is OK... but not clean.
So, if you select an IP address of another CiFS server it works, but if you select the IP address of a CiFS server that you really wanted to replicate to it doesn't work? And both CiFS servers on the same SP using the same ethernet interfaces, but doesn't work? Have you figured out why that is? I've got EMC support pulling files and don't have anything yet....
I would recommend you to check network and routing configuration between source and destination. For replication there are some ports required to be open in network. Please find below ports used by VNXe in an article.
emc283463
Here is another article which defines how to configure network for replication.
I have found an EMC article(emc303279) which is I think can resolve your issue. But unfortunately, the article has customer reading limitation. So, I recommended you to open a case with VNXe support team, then you can mention EMC article(emc303279) for investigation reference.
Info-Bergerac
2 Posts
686
0
Posted September 16th, 2013 01:00
Bonjour,
I have the same issue with error code 0x6500061... I select an IP of another server on the same SP of the destination VNXe and it is OK... but not clean.
Any idea ?