Vnx5800 - new install. On the back of bus 0/1 there is a number 01. On the back of 1/0 there are flashing dashes - what does that mean or do I need to do something to make it identify itself?
Also, has the issue with not being able ping spb from spa
Tried the reboot and still can't pong spb from unisphere. Any other suggestions? I am very new to the vnx world
You will need to set the enclosure ID for each enclosure that is connected to your SP’s of your VNX5800. Here is a link to the VNX5800 Hardware Information Guide. https://dell.to/3vZEaCW
Here is the link to solve online where you can generate an install guide to ensure that you are doing all the steps in the correct order. https://dell.to/3FAkyIT
I was pointing you to solve online so that you could generate the procedure for installing a VNX system.You can use the VNX5800 Hardware Information Guide that I sent the link to you earlier and find and set the enclosure ID.
DELL-Sam L
Community Manager
•
8148 Posts
•
34709 Points
803
0
Posted May 10th, 2022 14:00
Hello agcomptech,
You will need to set the enclosure ID for each enclosure that is connected to your SP’s of your VNX5800. Here is a link to the VNX5800 Hardware Information Guide. https://dell.to/3vZEaCW
Here is the link to solve online where you can generate an install guide to ensure that you are doing all the steps in the correct order. https://dell.to/3FAkyIT