I'm not aware of a method to get that information via RACADM. You can get it using omreport, and OpenManage CLI command. There is a CLI guid on the OpenManage Server Administrator support page. The command would be something like this:
That command will show the status of each disk. If a disk is rebuilding it will show a status of rebuilding and there is a progress line that will display a percentage.
Controller = 0 Status = Success Description = Show Drive Rebuild Status Succeeded.
--------------------------------------------------------- Drive-ID Progress% Status Estimated Time Left --------------------------------------------------------- /c0/e32/s0 - Not in progress - /c0/e32/s1 - Not in progress - ---------------------------------------------------------
Daniel My
12 Elder
•
6204 Posts
7355
0
Posted August 30th, 2019 14:00
Hello
I'm not aware of a method to get that information via RACADM. You can get it using omreport, and OpenManage CLI command. There is a CLI guid on the OpenManage Server Administrator support page. The command would be something like this:
omreport storage pdisk controller=0
http://www.dell.com/openmanagemanuals/
That command will show the status of each disk. If a disk is rebuilding it will show a status of rebuilding and there is a progress line that will display a percentage.
Thanks