Please help! XPS400 burn/break two HDs in 3 days, what's going on?
Please help
I just brought XPS400/9150. Recently i brought a Seagate 320GB HD from dell.
After i get it, install it, it was fine(showed in My computer, copy some files works great).
Then I ran the Diag on the HD, it passed all the test. but after i turned my PC on about 12 hrs the hard disappeared from My Computer, and when i restart the PC, it disapeared from Bio too.
In order to show up the HD, i have to unplug the power, ata cable etc.
So i call dell asked for an exchange, i thought it's HD problem. Now I just get the second HD yesterday, installed, every thing was fine, run the Diag, pass all the test. then left it one for the night. Next day morning, when I check the HD, it disappeared from the My Computer again and Bios, even the HD is connecting to the HD, but it can’t detect it.
if it only happen once I will think it is the HD, but now it Happed twice.
here are some things I think they may causing the problem
(problem cause by Hard drive set wrong)
1. there is a jumper on the HD, if the jumper is one, it will set the transfer speed 1.5Gbps, if no jumper, it is 3 Gbps. [ I took the jumper off, set as 3 Gbps ]
(problem cause by different power)
2. My friend gave me a SATA cable, because it is not a Right-angle Serial ATA Cable, so I install the HD at where the Floppy drive used to be. There are no SATA power around, only legacy power from DVD drive. So I used a Legacy to Serial ATA power cables adapter [one side connect to power from secondary DVD Drive, don’t have Second dvd, other side connect to HD SATA power]
because I am using the power which suppose to connect to IDE devices, Is it possible the power is different? Which will cause to burn the HD? (voltage is greater?)
should I just use the SATA power that come with the PC, but it only have two powers? where will I get the power for the third HD?
When the hard drive is running, I do felt the HD is hotter then my 80GB HD, but, not that hot.
Ask Dell how to install The new drive and get it in writing.
Yes I would not use a legacy cable to run a Seagate 320GB HD!!
That's for old ATA drives.
Who told you to do that? The power is used also by the CD drive.
So I think you're lucky if Dell takes it back.
Next time ask them how to install it and if you're not sure don't just plug it into anything that fits.
klbf
2 Intern
•
2713 Posts
121
0
Posted July 27th, 2006 11:00
Dimension 8300 | P4 2.80GHz | 2x512 PC3200 | Sparkle 6600GT OC | Creative SB Audigy 2 ZS (retail) Sennheiser HD555's | Leadtek DV2000 tv tuner | Seagate SATA 120,160, USB2 external 200GB | NEC DVD+RW ND-2100AD, Pioneer 16x DVD+/-RW DL DVR-109 | Dell E152FP 15" LCD | D-link DSL-G604T Router, D-link DWL-G122 wireless adapter | HP deskjet 3550, HP PSC 1310 all in one | Wacom graphire3 4x5 | PCI Cooler | 80mm hdd fan | 3dmark03=8446 | 05=3498 | 06=1821
Website