UNSOLVED

echo11

updated

18 years ago

E

echo11

3 Posts

0

2836

September 18th, 2008 19:00

New HDD - How to install Windows?

Hey guys,

 

I have a problem regarding my Dell Dimension 9150. A friend of me gave it to me as a present, because I built his new computer. We put his HDD in his new computer.

The problem is: He has no cds for his computer.

 

I have original Windows XP and Windows MCE licences and cds. The Dimension has a MCE key so I would like to install MCE.

 

After installing a new HDD, I tried to install Windows. BIOS shows me the HDD. When I start Windows Setup and choose "Install Windows", I get to the screen where I can choose, which partition I would like to use. But the Windows setup shows me not HDD!

Don't know if I need SATA drivers?! If I should need them, where can I find them? And how do I get them into Windows installation? I know that I can load them pressing F6, but I don't have an Floppy Device.

 

Would be great, if someone could help me.

  • shesagordie

    12 Elder

    •

    46017 Posts

    456

    0

    Posted September 18th, 2008 21:00

    echo11

    If you are not using RAID, enter the system setup, scroll down to drives, press Enter or + to expand the drive menu then down to "SATA Operation", press Enter.

    Change the SATA operation mode to "RAID Auto/ATA" press ESC to save and exit the BIOS.

    Then windows should install without a problem.

    Bev.

    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
  • echo11

    3 Posts

    456

    0

    Posted September 19th, 2008 04:00

    shesagordie, you are my personal hero for today ;). Thank you for your quick and detailed help. The HDD is shown in Windows setup.

    At the moment Windows setup is copying files.

     

    Again: Thank you very much!

  • echo11

    3 Posts

    456

    0

    Posted September 19th, 2008 06:00

    Next little question. When installing Windows MCE with my original CD and the key of the Dell Dimension computer, I get an cd key wrong message. Do I need a special version?
  • shesagordie

    12 Elder

    •

    46017 Posts

    456

    0

    Posted September 19th, 2008 18:00

    echo11

    If you are using the Dell OEM reinstallation disc, that came with the computer package, the product key should not be requested, or required.

    Bev.


    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
  • shesagordie

    12 Elder

    •

    46017 Posts

    456

    0

    Posted September 19th, 2008 18:00

    echo11

    :)

    Bev.


    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
  • mikeri12

    8 Posts

    456

    0

    Posted September 24th, 2008 23:00

    I have an E521  with the original Vista premium installed from the factory. Well I don't care for Vista and have a WINXP which was purchased for another system.

    I want to load XP but don't want to back up 100gig of files so I can use the original HDD. If I install another hard drive which will be SATA, will XP recognize it ?

     

    I have read that XP won't read see the SATA drive.

     

    Any help will be appreciated