Ok, this is a new XPS 710 with 2x 250 samsung drives, and configured to stripping..
I keep getting "Access failure:Critical error on disk Samsung SP2504C (Port: SATA0) or (1),
Dell sent me a new M/B and two new HDs, but its still here, One point to say, is the error only happens when installing a large game. it does not make any difference installing from any drive or over a network.. yet i can copy 20 gig from drive to drive .. and get no error.
I installed Unreal 2004 and pulled the error , this alway happens close to the end of the install proccess to..
Ive tried all Nvidia drivers, changing bois setting, and over the last week reinstalled XP about 30 times, (alway fresh install) fitted the new M/B and tried the new drives.
I set the system up as single Drive, NO error
set as Raid 1 error
set as Raid 0 error
Has anyone come across this before, and did you figure out the cause ??
I have the same problem as what you describe, I believe it's a known issue with the nvidia chipset. Most of the time I can ignore the error as it doesn't seem to hurt anything, but sometimes the system gets unresponsive and I have to keep the power button pressed in order to shut it down. I notice the error when I run 2 virtual (windows) machines using VM ware at the same time. It doesn't happen when I run multiple vmware linux sessions. I also noticed when copying a rather large file the error pops up. Hope Dell will do some investigation and comes with a solution as it's pretty easy to simulate the issue....
Thanks for the reply, I hope others will post there issues, and perhaps DELL will take notice. Personaly my pc is only 8 days old, so i will speak with dell tomorrow. and update here whats said.
If anyone has found other errors with the XPS please update the info to this thread.
Heya, I havemuch the same problem. Got my XPS 710 last Wednesday with 2GB RAM, 1x nVidia 8800GTX, BTX motherboard and two Samsung SP2504C disks in RAID0 and it hasn't worked correctly from the point I took it out of the box.
Initially, I kept getting the critical raid failures popping up so reported it to Dell Tech Support. They responded by saying it was probably a misconfigured RAID container and to drop it, recreate it then reinstall the O/S.
This is where my problems began ... The O/S refused to install from the bundled DVD and always fell over when it came to copying files. From what I've figured out the nVidia SATA driver bundled on the reinstallation disk doesn't properly support the SATA controller that's built into the motherboard. For around 40 installs (yeah, I'm a determined so and so ...) XP never got beyond the "copying files" part of the setup routine. I created a custom setup disk using the Dell reinstallation DVD as a base and using nlite to add the updated nVidia SATA drivers (downloaded from Dell). It sorts out the XP setup problems but, after looking at the event log, there are still disk problems showing up.
I must have thrown around 40 hours at this thing so far and it still doesn't work. The Dell engineer that came out to me replaced the memory, hard disks and the motherboard but it made no difference - the SATA driver thing came later when I was just trying things for the sake of it.
I've tried just about every combination of memory, drives, cables, etc. that I could think of and it really doesn't make any difference. The only marked improvement I've seen is by loading the up to date SATA driver but even then my system is still generating errors.
Hope you get a satisfactory solution to your problem.
Well Dell are sending me a new machine... due 21/2/07, So until then i can do alot.. Dell say this has never been seen before.. So i await the new machine with interest. :D
Either way i will be a regular poster here from now on. As you may see by my Tech Stuff post, ive been working on PC'S for over 20 years, and look forward to helpping other with issues.
sg3
27 Posts
339
0
Posted January 28th, 2007 12:00