My PC has a 32GB hard drive that I've pretty much filled up. I've purchased a new hard drive (320GB). How do I make it the primary drive and the 32GB one the slave? Do I need to first install the new drive as a slave and install an OS on it (XP) and then do the "slave-master" switch? Thanks.
Is this a parallel ATA drive (one with the long, dual-row connector)? Most of the time, these are set up to use cable select for master-slave. You connect the master to the end of the cable, and the slave to the middle. Look at the jumpers on the drive. There should be a master/slave/CS setting. Make sure both are set to CS, and you can just plug in the new drive where the old one was, and plug the old drive into the currently-unused connector in the middle of the cable. When you boot that way, you can install your OS on the new master without making any other changes.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
Duhhh
251 Posts
276
0
Posted October 10th, 2007 17:00