
UNSOLVED
How to activate RAID 0 in E510
Hello,
I have added two WD 400Gb SATA drive to the computer using the SATA connectors on the motherboard, went into BIOS tried to do RAID 0 but it did not give me that option only gave me option for RAID 1. Tried different settings sometimes it would recognize both drives, sometimes only one drive so I gave up after a while. I ended up using the card that came with the WD drives and these drives are now working fine in RAID 0; however, I have lost a very valuable PCI slot. Any help how to use the SATA connector on the motherboard and whatever changes that I would need to make in the BIOS setting to be able to set up these two hdd's as RAID 0 is greatly appreciated. I really want to recover the very valuable PCI slot to install a Firewire 800 card b/c I used up the last slot for the WD SATA card. Any suggestions is greatly appreciated.
I have added two WD 400Gb SATA drive to the computer using the SATA connectors on the motherboard, went into BIOS tried to do RAID 0 but it did not give me that option only gave me option for RAID 1. Tried different settings sometimes it would recognize both drives, sometimes only one drive so I gave up after a while. I ended up using the card that came with the WD drives and these drives are now working fine in RAID 0; however, I have lost a very valuable PCI slot. Any help how to use the SATA connector on the motherboard and whatever changes that I would need to make in the BIOS setting to be able to set up these two hdd's as RAID 0 is greatly appreciated. I really want to recover the very valuable PCI slot to install a Firewire 800 card b/c I used up the last slot for the WD SATA card. Any suggestions is greatly appreciated.
Responses (2)
Solutions (0)

arlmed
11 Posts
179
0
Posted November 29th, 2006 14:00