UNSOLVED

TobiM

updated

20 years ago

T

TobiM

35 Posts

0

8278

February 16th, 2007 12:00

E520: Intel Matrix Driver necessary when using just one Harddrive?

Sorry guys, I really need your help.
And sorry for posting on two boards, but I didn´t know which one would fit better.
 
I want to reinstall everything on my PC this weekend, and now I got 2 different pieces of information from the Dell Support.
 
I only have the one original Harddrive that came with the PC, a 250GB SATA-Drive.
So do I have to install these drivers here
 so that SATA works properly or are these drivers and the application only necessary if you use multiple harddrives?
 
Because one guy from the support said they are necessary, and the other one told me I don´t need them if I just hav one harddrive.
 
I´m using Windows XP with SP2.
  • shesagordie

    12 Elder

    •

    46017 Posts

    217

    0

    Posted February 16th, 2007 18:00

    TobiM
     
    If you don't have RAID, then there should no need to install the Matrix Driver, but you need to make the following changes,
     
    F2 to enter the Setup.

    Arrow down to Drives, then enter.
    Arrow down to SATA operation, then enter
    Arrow to RAID Autodetect / ATA and click enter to select.
    Then click ESC to save and exit.
     
    Bev.
     
     
     
    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
     

     
  • TobiM

    35 Posts

    217

    0

    Posted February 17th, 2007 08:00

    Okay, thank you for your answer. But I read that this BIOS setting could decrease the performance. It´s even written inside the BIOS, that Dell recommends to keep the RAID setting even with just one harddrive, for better performance. It´s no problem to install the Intel Matrix driver, but I just want to be sure that it doesn´t cause any problems or conflicts because I just have one harddrive.
  • shesagordie

    12 Elder

    •

    46017 Posts

    217

    0

    Posted February 17th, 2007 19:00

    TobiM
     
    There should be no problems with using the RAID driver, with a single hard drive, but you will need an internal floppy drive to install the driver when it's requested.
     
    Bev.
     
     
     
     
    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.
     
     


    Message Edited by shesagordie on 02-17-2007 03:35 PM
  • 217

    0

    Posted February 19th, 2007 19:00

    It won't install nor function without multiple drives configured for raid. So you can try to install it, but it won't, so you will not see decrease in peformance.