So I have no idea why, but this drive has decided it doesn't want to work for me any longer. All I was doing yesterday was fiddling with Windows Media Player to burn a CD before it notified me I didn't have a cd writing device. what!?!? All I have installed lately is wireless mouse software, and that surely wouldn't cause a conflict, right? Anyways, some more specs: I have a Dimension 4600, that came w/ a normal CD-ROM drive (works fine still) and a DVD-ROM/DVD+RW/CD-RW drive (the one not working).
The errors:
In device manager, the drive is still listed, it is just disabled. "The device is disabled." is the error message. When I try to enable it, it says "Windows could not enable the device."
In another column listed "Other Devices", is a "PCI Input Device", whose error is "The device is not configured properly." I can only assume this is the malfunctioning DVD drive, because I haven't installed anything else. It has an option to "Reinstall drivers", but all my system CDs are 2 hours away at college. Is there another way to do it? Does this sound like a driver problem?
I tried to use the drivers for this I found online, but it was some flash utility that couldn't detect the drive, and no *.inf files. Suggestions are most appreciated, thank you.
Thanks, I thought I had already tried un-installing it, but it did the trick this time. However, the problem in the "Other Devices" column remains, even after I uninstalled it. It says that it's location is "PCI slot 2", and that's where the sound card is. When I check in "sound devices", the sound card says it's working fine. All that's different is the one in "sound devices" has function 0, and the one in "other devices" has function 1. I don't know what the problem is, the sound works fine! I'm going to leave it alone, unless someone knows the difference between the functions 0 and 1 of a sound card (Creative brand...i'll get more specs if needed).
i'm having a similar problem after installing a new dvd rw, but i don't believe that my CD or DVD rw are showing in my device manager anymore. Can you tell me~where will I see them.... should they be listed under disk drives? (sorry~brainless question totally)
Did you jumper the new drive as Cable Select (CSEL, CS)? DELL systems use cable select which allows the drive position on the IDE cable to determine the Master and Slave.
Skybird
1 Rookie
•
10871 Posts
137
0
Posted December 29th, 2004 16:00
Windows will auto detect and install the correct drivers.
Are there any Error Codes (numbers) in the Device manager?