UNSOLVED

773andy

updated

21 years ago

7

773andy

18 Posts

0

5287

December 29th, 2005 15:00

DVD-RW Compatibility issues?

I'm looking at buying an AOpen ISU-8484G model DVD-RW to upgrade my I8200.  I came across the following in the customer reviews:
 
Comments: It shipped with 1.01 firware, and could not sucessfully burn CDs or DVDs. Problem solved after updating to 1.10 firmware. I installed it in my Dell Inspiron 8200 fixed bay. It causes a longer boot and a "fixed optical drive not found" error message during boot, but it works normally in Windows XP. The laptop will no longer power down automatically on shutdown. I have read that the NEC 6500A drive causes a similar problem on Toshiba laptops. Is this also a cable select issue? This is definately an inconvinence, and lowers my satisfaction with an otherwise great drive.
 
Is this an issue likely to affect all 8200s? 

Message Edited by 773andy on 12-29-2005 11:52 AM

  • 163

    0

    Posted February 5th, 2007 21:00

    I just installed an AOpen ISU-8484G to my Inspiron 8100 and am experiencing the same issue regarding booting and shutdown.  Have you found a solution?
  • 773andy

    18 Posts

    163

    0

    Posted February 5th, 2007 22:00

    No, but other than the delay, I have experienced no issues with this burner.
  • 163

    0

    Posted February 6th, 2007 21:00

    Are you able to boot from the new DVD drive?  I bought the drive to replace the original and I am not able to boot from my Windows XP CD should I ever need to reinstall.  Have you found a workaround?
  • 773andy

    18 Posts

    163

    0

    Posted February 6th, 2007 22:00

    No, I have not.  Perhaps you could create a floppy boot disk, and once you're up, the drive may work.  There are some other forums out there (dedicated to DVD-RW drives) with more info on modifying your drive, but that is beyond my expertise.  Supposedly you can "flash" the bios and reprogram the drive, however, from what I understand, you run the risk of destroying it.  I decided it wasn't worth it. 
     
    As for being able to boot from the DVD drive, I'm just gambling that I won't need to.  This machine is going to be obsolete in a few (if it isn't already).