I've got a couple questions which probably go hand in hand. Recently, my computer's been getting really hot when it's on. I was told by one of the dell support guys that my fan's probably not running like it should and that there was a way to reset it and see if it helps. Does anyone know how to do this? Also, my CD burner has pretty much given up on me. Every time I try to burn a CD, it'll start, maybe get through one track (which is enough for the CD not to be burnable again), then tell me that and underrun occurred and to try new media. I've tried 5 different brands of CDs in my burner and nothing helps. However, the CDs are getting really hot as well when I attempt to burn anything. If anyone could help, it would be greatly appreciated.
F12 should force the temperature monitoring routine to take an updated reading of the system temps. There were some problems with BIOS on some Inspirons that kept the fans running continuously. Your symptoms are opposite, but forcing an updated reading can't hurt. On some Inspirons, a program named I8kFanGUI can be used to monitor system temps and test or control fan operation.
Which Inspiron model is it? Are the fans running at all, or is it overheating despite the fans running?
The CD-RW lazer has to heat the CD up to perform the write operation, so it gets pretty hot. The buffer underrun error is likely to refer to the transfer of data to the CD-RW. There may be some techniques and software settings that can help prevent that.
I've got an Inspiron 5100. It seems that the fan does run constantly but my computer doesn't cool down. A few months ago, it was heating up so much that it would actually shut itself off but that seems to have stopped since I put my laptop on a flatter surface. How exactly do you run those tests? I'm not all that computer literate and hitting f12 doesn't do anything. As for the burning CDs, I use Roxio Easy CD Creator 5. The burner didn't seem to have many problems until recently when the heating up of the computer has gotten bad. I've even tried burning CDs from the media player or ITunes. Nothing seems to work though. If you know anything about that, let me know. Thanks for your help!
The I5100 uses a high-power Pentium 4 processor and the cooling system needs to be in top condition to keep the processor from overheating. There are posts on the Inspiron / General Hardware board that discuss this further, including recommendations to inspect for dust and clean the cooling fins regularly.
I8kFanGUI could be helpful by allowing you to read the system temperature and test the fans, but if your fans are running and your system is still getting too hot then they probably don't need to be tested. It's a third-party program available here if you are interested. http://www.diefer.de/i8kfan/
If you haven't already done so, visit the on-line User Guides under the Product Support tab at the top of these pages. There you can find several documents specific to your system, which you may find useful.
I use Roxio Easy CD Creator 5 also. I'll check out my settings and Predator's site. http://www.the-predator.com/ I'll post back after I review that info.
Meanwhile, clean the cooling system as this is quite possibly related to the processor overheating. If you need more help with cleaning the coolong system, you could post on the Inspiron / General Hardware board for assistance from I5100 owners with experience in this area. Make sure you provide enough information so they can help. I'll look there occasionally to see if I can offer any more assistance.
Once the temperature is under control, try a CD burn and check back here to see what I've come up with relevant to the buffer underrun problem. Post back with any new info.
GreyMack
2 Intern
•
2190 Posts
829
0
Posted August 12th, 2004 09:00
F12 should force the temperature monitoring routine to take an updated reading of the system temps. There were some problems with BIOS on some Inspirons that kept the fans running continuously. Your symptoms are opposite, but forcing an updated reading can't hurt. On some Inspirons, a program named I8kFanGUI can be used to monitor system temps and test or control fan operation.
Which Inspiron model is it? Are the fans running at all, or is it overheating despite the fans running?
The CD-RW lazer has to heat the CD up to perform the write operation, so it gets pretty hot. The buffer underrun error is likely to refer to the transfer of data to the CD-RW. There may be some techniques and software settings that can help prevent that.
Which software are you using to burn CD's?
GM