UNSOLVED

iamnotacowboy

updated

22 years ago

0

10359

May 26th, 2005 02:00

2nd hard drive performance problems.

Hello,
I recently installed a 2nd hard drive (western digital 160gb) to my Dimension 2400 computer. Everything seemed ok. The computer recognized it etc. The purpose of the 2nd drive was to hold music and photos for my wife's ipod. I installed itunes on the new drive and choose to save music on the new drive. Now when I play songs in iTunes, the music cuts in and out and has little distortions in it. I checked and all of my master/slave settings are correct, and I checked my bios and let it know there was a 2nd hard drive. It "skips" more when I am accessing the drive with other programs and when I am doing other work on the computer. Sooo basically I can't listen to music while I am doing anything else on the computer. Please let me know if I am doing everything correctly. P.S. I also tried partitioning the drive and that did not help.
  • 448

    0

    Posted May 26th, 2005 14:00

    I assume you put the second drive on the same cable as the
    first hard drive. Try putting the second hard drive on the
    same cable as the CD/DVD. That way it won't conflict with
    the first hard drive.

    The other alternative is to use Linux instead of Windows.
    I do that and can listen to music and do other work even
    when the second hard drive is on the same cable as the
    firt hard drive.
  • wave_dave

    111 Posts

    448

    0

    Posted May 26th, 2005 15:00

    Make sure that the second HDD is DMA enabled as opposed to PIO enabled.
  • 448

    0

    Posted May 26th, 2005 18:00

    Oh, I actually tried putting it on the cdrom cable first, and the problem seemed much worse. Any addtional help would be great.
    Thanks
  • 448

    0

    Posted May 26th, 2005 18:00

    Thanks for taking the time to help. One last question. How do I set the DMA/PIO setting? Thanks again.
  • rlfrank

    1 Message

    448

    0

    Posted May 26th, 2005 18:00

    I have to ask here, because I haven't played with hardware for
    a while, but is the dvd/cd controller capable of the same speed as the
    hard drive controller?
  • 448

    0

    Posted June 2nd, 2005 20:00

    FWIF, I now have a 2nd hard drive (running Linux) on the same
    IDE cable as the DVD, working without any problems.

    The suggestion to check the DMA/PIO to your 2nd hard drive
    sounds like a good idea.