UNSOLVED

sandeepmittal

updated

13 years ago

0

839

July 5th, 2013 00:00

known bug issue on upgrading RPA into 4.0

Hi Team,

recently i was upgrading RPA from 3.4 sp2 to 4.0. i was sucessfully completed first phase of upgrade that is 3.4 sp2 to 3.5 sp2.

but during upgrade from 3.5sp2 to 4.0, i get error message “Apply Upgrade Failed.Connection failed. Verify the RPA is
reachable, make sure the login credentials are correct, check user status and
try again.”

we esclated this to RPA engineering and come to know that This upgrade issue is a known bug in the 4.0 upgrade installation kit.
The issue causes reboot regulation and prevents completing the upgrade.

The workaround was to remove all Journal Volumes from the RP Storage group and
disable all CGs.
This would eliminate the reboot regulation.

  • ankur.patel

    2 Intern

    •

    286 Posts

    415

    0

    Posted July 11th, 2013 06:00

    Thanks , it seems like this bug was fixed in the latest patch of RecoverPoint that was released on the 28th of June. 4.0P1. Reading the release notes there were a couple fixes based on reboot regulation, was that the version you were installing?

  • Steve0_2012

    1 Rookie

    •

    73 Posts

    415

    0

    Posted July 11th, 2013 08:00

    I am out of the office until 12/07/2013.

    Note: This is an automated response to your message "Re: -

    known bug issue on upgrading RPA into 4.0" sent on 11/07/2013 14:18:53.

    This is the only notification you will receive while this person is away.

  • guzefr

    6 Posts

    415

    0

    Posted July 17th, 2013 15:00

    I'm just doing an upgrade from 3.5 SP1 to 4.0P1 and i have the same problem. Thx for your workaround.