adalton818

updated

8 years ago

A

adalton818

1 Rookie

•

6 Posts

1

40809

February 8th, 2019 01:00

swc0700 idrac is not ready. the configuration values cannot

i have R420 and my problem is that fan is full speed and idrac initializing not responding and auto reboot. the problem is start from i upgrade my bios etc and during installation upgrade is stuck (hang), after that this problem accure. i already try nvram reset, telnet using serial (which appear is the same windows with the monitor), using download iso from dell (and hang during collecting system inventory or something like that), download all tools that i can find on dell.com. any idea what should i do anymore ? sorry with my bad english. thank you albert dalton

  • Greg asd

    1 Rookie

    •

    61 Posts

    13750

    1

    Posted June 2nd, 2022 04:00

    Same problem here. Exactly the same problem. Sad thing is I cant dismiss it and buy another one.....

  • adalton818

    1 Rookie

    •

    6 Posts

    28259

    0

    Posted February 8th, 2019 01:00

    i have R420 and my problem is that fan is full speed and idrac initializing not responding and auto reboot. the problem is start from i upgrade my bios etc and during installation upgrade is stuck (hang), after that this problem accure. i already try nvram reset, telnet using serial (which appear is the same windows with the monitor), using download iso from dell (and hang during collecting system inventory or something like that), download all tools that i can find on dell.com. any idea what should i do anymore ? sorry with my bad english. thank you albert dalton
  • adalton818

    1 Rookie

    •

    6 Posts

    28209

    0

    Posted February 8th, 2019 07:00

    can you tell me how to resetting iDRAC by command line or flashing the firmware ? because i already try racadm (not working it said there is no something i forgot), try install lifecycle controller (it said my hardware is not compatible) and the other software that sound iDRAC and lifecycle controller everytime it said my hardware is not compatible. can you explain why the software is said so ?

    thank you

  • Dell-DylanJ

    6 Operator

    •

    2924 Posts

    28201

    0

    Posted February 8th, 2019 07:00

    RACADM would have been the correct way to try, racadm racreset -h. The software would tell you that the update is incompatible when the iDRAC is not responsive. Software updates leverage the iDRAC and Lifecycle Controller to update firmware. When those are unavailable, the job can't be created, or the hardware inventory checked.

  • Dell-DylanJ

    6 Operator

    •

    2924 Posts

    28216

    0

    Posted February 8th, 2019 07:00

    Good morning Albert,

    You definitely got started on the right path by trying to clear NVRAM. One thing that you might also try is to remove power, then hold the power button down for about 30 seconds. This should force the iDRAC to restart. This or the NVRAM clear you tried previously,  normally resolve the issue. When they don't, you can try resetting the iDRAC by command line, or flashing the firmware, but it can result in needing to replace the board.

  • adalton818

    1 Rookie

    •

    6 Posts

    28186

    0

    Posted February 8th, 2019 22:00

    racadm racreset -h is not working, error : unable to perform requested operation.

    do you any suggestion ? i'm using windows server 2008, already try 2012 also.

    i install ractools_x64 date 06/08/2013

  • Dell-DylanJ

    6 Operator

    •

    2924 Posts

    28141

    0

    Posted February 11th, 2019 13:00

    At this point, the only thing I can recommend is to replace the system board, unfortunately.

  • adalton818

    1 Rookie

    •

    6 Posts

    28107

    0

    Posted February 12th, 2019 19:00

    i don't understand, idrac is fail to update and i have to replace my mainboard ? is there no other way then replace my mainboard ?

  • Dell-DylanJ

    6 Operator

    •

    2924 Posts

    28078

    1

    Posted February 14th, 2019 06:00

    The iDRAC is part of the mainboard, not a separate component. If the update failed, and now the iDRAC is stuck, the troubleshooting steps we can take are what you did before. If those don't resolve, replacement is my recommendation.

  • Biopetro

    1 Rookie

    •

    1 Message

    22309

    1

    Posted April 24th, 2020 16:00

    Hi @adalton818, 

    I have the same problem on an R420, caused by the Dell update DVD (PER420_BOOTABLE_20.03.00.123), which should perform an automatic update), which restarted the server and created this big problem for us. I suppose we followed the recommendations for Dell support updates and now we will be at a loss as the machine is out of warranty.
    Were you able to solve this problem? If so, how?