UNSOLVED

GlasgIT

updated

6 years ago

G

GlasgIT

1 Rookie

•

3 Posts

0

371

October 6th, 2020 08:00

R520 memory configuration.

Hi, 

I have an R520 with 4 x 16GB DDR3 1600 MHz DIMMs and I am looking to add in another 4 of the same size and speed, with part number JDF1M.  

I was expecting slots A1,B1,A2,B2 to be populated, but it is A2,B2,A3,B3.  

Is it OK for me to add the new DIMMs in to A1,B1 and then A4 and B4 ?  Just wanted to double check in case this had any specific configuration required. 

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    261

    1

    Posted October 6th, 2020 12:00

    Hello GlasgIT,

     

    I see you are planning to add additional memory matching what you currently have.

     

    Depending on what your memory mode in the BIOS -

     

    If you have, or change to, Advanced ECC use:

    A2, A3, A5, A6, B2, B3, B5, B6

     

    If you have, or change to, Optimized mode you can use:

    A1, A2, A3, A4, B1, B2, B3, B4

     

    Memory guideline on Page 37-41 Modes described here also : https://dell.to/3jAAVcI

     

    Please let me know if this helps.

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!