UNSOLVED

cambo81

updated

20 years ago

C

cambo81

2 Posts

0

67723

February 16th, 2007 22:00

DELL 3010CN MAC DRIVER

Guys, Does anyone know where I could find a driver for the 3010CN for mac without hvaing to use it via virtual PC? Look foward to your posts.... cambo
  • John Nolan

    22 Posts

    1017

    0

    Posted February 17th, 2007 12:00

    Go here. Message Edited by John Nolan on 02-17-2007 08:53 AM

    Message Edited by John Nolan on 02-17-2007 08:53 AM
  • cambo81

    2 Posts

    1017

    0

    Posted February 17th, 2007 22:00

    Thanks for your prompt response. I have tried to install the driver and when I have installed through the router it still doesnt work.
    The wireless router address is 192.168.2.1
    the printer address is 192.168.2.4
     
    Any hints on how to get it to work?
     
  • John Nolan

    22 Posts

    1017

    0

    Posted February 18th, 2007 10:00

    Ooops! I misread your message: I thought we were talking about the 3110cn! Sorry about that!

    Dell doesn't list list the 3010cn as supporting Mac OS; that why I bought the 3110cn. You may have to get a driver for a different printer to get your printer to work on the Mac...I have seen some mention of people using Lexmark drivers. Try searching on the forum. This message in encouraging, but I don't have any details. Perhaps if you reply to that thread the respondent "rdwhitti" will give you more details.

    Here's what I know from my experience with the 3110cn. Some of this info may be pertinent, some may not.

    Firstly, I'm not sure what you mean by "installing through the router". After downloading the files, you mount the disk image on your computer and run the installer from the target computer to install the drivers on your computer's disk.

    After that the easiest way to get things going is to connect the printer with a usb cable, and use the Printer Setup Utility to add the printer to your system. The Dell should show up as choice when you choose "add". This is the method detailed in the 3110cn manual.

    Using an ethernet connection has some advantages over the usb interface, but isn't mentioned in the manual. It seems as if no one at Dell knows that the software engineers added this to the Mac print drivers!

    If you check out this discussion on Adobe's forums you'll get a fair amount of info on the printer. Message 69 is the info I used to get the printer set up with an Ethernet interface (although I didn't up a static IP, since I didn't know how: I read the the IP address that I stumbled upon while searching through the menus on the printer's control panel!).

    Message Edited by John Nolan on 02-18-2007 06:31 AM