Mjeuk

updated

14 years ago

M

Mjeuk

14 Posts

0

102627

May 31st, 2012 06:00

Dell 1720dn printer, how to reset to DHCP from fixed IP

I have a Dell 1720dn printer connected as a network printer hanging off my modem/router and with a fixed IP address.

I have just changed my ISP and no longer have a fixed IP address and so need to change my printer setting to allow DHCP.

I see no way of doing this other than uninstall and reinstall the printer .... or am I missing something ???

Thank you for any halp

 

  • Printster

    117 Posts

    3172

    2

    Posted June 7th, 2012 12:00

    If you can still access the printer's web server then you can change the IP address back to DHCP in the network settings. Otherwise I would try a factory reset on the printer and that ought to bring you back to DHCP:

    Turn off the printer

    Open the Access Cover to the Printer

    While holding down both the Continue and Cancel buttons turn the printer back on

    NOTE: lights will cycle a few times

    After the error light turns on solid and stays on

    Release the Continue and Cancel buttons

    Close the access cover

  • wavesound

    1 Message

    3172

    0

    Posted October 16th, 2014 05:00

    Hi

    Just like to say thanks, this really helped.

    Cheers

    Bob

  • cheebase

    9 Posts

    3172

    0

    Posted May 4th, 2017 16:00

    Thank you! Thank you! Thank you!

  • LogicWeasel

    1 Message

    1781

    0

    Posted November 4th, 2019 15:00

    I'm so glad this still exists.  In the grim dark future of 2019 when a client still has one of these old printers clanking around, it's so amazing to know how to reset since they don't even have a doggone display and they don't show up in the list of Network printers discoverable in Windows 10.