UNSOLVED

Hagar74

updated

22 years ago

H

Hagar74

4 Posts

0

13465

February 7th, 2005 04:00

A 940 paper jam

I am unable to print anything. As soon as i turn my printer on you hear it spool up for a few seconds then fault  " press power then clear paper jam " appears.
There is no paper jammed however. I have unplugged it & tried it a dozen times but the same thing occurrs.
 
Please help ......
  • ORTHO06

    1 Message

    245

    0

    Posted February 9th, 2005 09:00

    hi,
    I've got the same problem. Did you solve yours?
    thanks
  • Hagar74

    4 Posts

    245

    0

    Posted February 11th, 2005 05:00

    No have not solved the prblem at all. Waiting anxiously for any help i can get .....
  • Phaedrus_

    20 Posts

    245

    0

    Posted February 15th, 2005 16:00

    Try this:

    1) remove all the paper from the input tray.
    2) unplug the USB and power cables.
    3) pick up the printer and turn it upside down and shake it a bit to see if anything falls out.

    If nothing falls out and you continue to get a paper jam error even when nothing is loaded in the input tray I would call Dell. You most likely need a new printer.
  • 245

    0

    Posted March 20th, 2005 03:00

    i have the same problem as you and others have...my printer thinks it has a paperjam but it no longer does.  I can place paper in it when it turns on (and the roller bar goes wild and turns and turns and turns....) and the paper will be rolled through just fine...and then the message to power off and clear the paper jam appears.  DELL on-line chat support had me uninstall and reinstall the printer software and drivers but with no luck in solving the problem.  I'd appreciate knowing if you've found a solution yet.
  • Hagar74

    4 Posts

    245

    0

    Posted March 20th, 2005 05:00

    I called up DELL they sent me out a brand new printer the next day no questions asked, so they are obviously aware there is a problem with the printers. It is the same model unfortunately, but so far working fine, extended my warranty a further 2 years just to be sure though. I hope your is still under warranty also .....
  • Big Vic

    1 Message

    245

    0

    Posted June 21st, 2005 19:00

    I had the same problem.  Reinstalled the driver and software, disconnected the usb and power lines and shook it.  I called Dell and they shipped me a refurbished printer.  I think it is a circuit board problem.