UNSOLVED

Brianwelch

updated

22 years ago

0

8966

November 17th, 2004 15:00

Software for 660F and 224F

I am purchasing a used 660F, 224F and 56F which is not coming with any software. I've seen alot of references to the 'Dell OpenManage Array Manager' software package. I cannot find this software anywhere. How would I go about getting all of the software that I need for this.
I will be hooking it up to 1 NT server and 1 2003 server.
HELP!
Thanks!!
  • jeffy210

    33 Posts

    175

    0

    Posted November 18th, 2004 13:00

    OpenManage Array Manager is a free piece of software that is available on Dell's site which you can find at http://support.dell.com/support/downloads/type.aspx?c=us&cs=19&l=en&s=dhs&SystemID=PWE_1850&category=0&os=WNET&osl=en&deviceid=745&devlib=36

    Your bigger problem is going to be getting the rest of the software needed to run the SAN. There is a program called Storage Consolidation (StorageC for short) that is used to mask the LUNs from the servers since the 660F can not mask LUNs locally. In addition to that, you'll also need to be using the QLogic QLDirect program for failover (assuming you have 2 HBA's and 2 switches, if not don't worry about this part).

    You can use Array Manager on one system to slice and dice the LUNs however you see fit, and then StorageC to assign the drives out to the servers. You'll have to contact sales to get a copy of StorageC v5 (most current I think, and yeah its a bummer that it isn't free).

    One other thing to note, and I'm waiting for an answer to this in another post. The only LUN that can be deleted is the last one created. So if you make 4 virtual disks and want to delete the first one, you'd had to delete 4, then 3, then 2 to get to 1. Obviously this is very limited and can cause problems with larger systems. I am hoping to get an answer and/or workaround to this problem soon. Just keep that in mind.

    Hope that answers some/most of your questions.

  • mlaity

    3 Posts

    175

    0

    Posted March 7th, 2005 19:00

    Brian,

    I have been haggling with Dell for some time now trying to get support for Win2K3 and the old Dell PowerVault 660f/224f/51f platform.  They no longer support this product unfortunately.  In order to get Win2K3 to connect to these containers, I had to go QLogic for software support.  They have the QLDirect driver available for Win2K/2K3, which allows failover/load-balance support.  They also have their own software package that basically does the job of Dell's StorageC.  It is called SANSurfer.  It will run on Win2K/2K3 and I believe it has an agent for Netware servers as well.  It has a nice GUI which gives you a lot of control.  QLogic also has the latest drivers and BIOS versions for the QLA2200/2300 HBA cards for numerous operating systems.

    I have been able to use these components from QLogic, as well as the Open Manage Array Manager software from Dell's site, to get all my servers (Win2K and Win2K3) connected into my SAN.

    Again, this is NOT supported by Dell, and doing this will be at your own risk.

    One word of warning, by default, when I first installed SANSurfer and connected my servers, they were all seeing EVERY LUN in the SAN, and it caused some yuckiness in Windows since multiple servers were trying to access the same data and MBRs.  Make sure you have the correct LUN masking setup in SANSurfer!  PLEASE TEST WITH NON-PRODUCTION ENVIRONMENT!

    Hope all goes well with your SAN config!

    MattL