Replacing and Upgrading hard drives in PowerVault 725N
I have an old PowerVault 725N configured with four 80GB drives for a whopping 320GB of storage. I would like to replace those drives with something larger. Is this possible?
Is it simply pulling out the old drives and inserting new ones? Will I need to reload the OS? Do I need to update the BIOS to support the new drives?
Dell has an 160GB drive available via spare parts for $65.99 (341-1247)
Do I need to use Dell drives? If not what sort of drives do I need?
Any help or advice anyone can offer would be greatly appreciated. Thanks.
Perform a search on these boards. This question has been asked and answered before a few times. Some people even posted how they did it and such (bios updates, driver updates, firmware updates, etc).
Thanks, I've doen the search but didn't come up with much. I think there were only six results total for '725N'. Perhaps I am not searching for the right terms? If you could point me in the right direction it would be appreciated. Thanks.
The largest I've ever head of it supporting is 250GB drives, but that's with the latest BIOS which I believe is A09. Please double check that on the downloads section.
A big question I have is if your NAS is software or hardware raid. That will help me answer the question on how you can incorporate those drives into the system.
Good question, how do I tell the differance between a hardware and software RAID? I can tell you that it seems to be dynamic and that I have two volumes that are dynamically mirrored and a thrid volume that is dynamic Raid-5. After reading this forum all day seems ot be a pretty common setup. My guess would be that this is a software RAID except that I do see a Dell CERC ATA100/4ch RAID Controller listed in the device manager.
Anyway to determine the BIOS version without rebooting?
- C. Thomas
Thanks. Looks like I have Ami BIOS version 07.00.00. From what I have read so far I am pretty sure I need version A09 in order to use larger drives. I have a reboot scheduled for tonight anyway so I will try to take care of the BIOS update then. I assume there are instuctions on the 725N support page on how to update the BIOS.
After that is it a simple matter of swapping out the drives and reinstalling the OS? Any other gotchas?
The OS is on CD but there is no CD Drive in the 725N. Do I need to use an external USB CD? I've heard mention of a USB key that is bootable. No, I haven't read the manual about reinstalling the OS yet.
Is it possible to Ghost or otherwise copy the C and or D partitions so that I don't need to start from scratch?
I have a rather large collection of PowerVault CDs, anyway to determine which ones go with the 725N?
Dell PowerVault Resource CD 2.3.6.2 P/N J3802
Dell PowerVault Reinstallation CD 2.3.6.2 P/N J3801
Dell OpenManage Applications 2.0 P/N 419TK
Dell PowerVault Storage Manager 2.0 for Server Appliances P/N H2665
Dell PowerVault 745N NAS Systems 3.4.9.2 P/N PC104 (will the 745 disk work on the 725?)
PowerVault701N/705N vers. 2.4 (not sure why I have this, I don't have a 701 or 705)
Thanks. I'm going to go back and read the manuals now.
Looks like I have the right CDs. Both the Reinstallation and Resource CD have a file with 725N in the file name at the root level.
I have finished reading the manuals and from what I can figure out these are steps I should take to upgrade the drives. If anyone else who has done this before and could take a look and let me know if I have missed something I'd appreciate it.
1. Upgrade BIOS (can only find version A08 on the Dell site)
2. Back Up Data Partition (Will this preserve permisions?)
3. BackUp System State Data with Win2K Backup and Recovery Tools
4. Shutdown system and remove old hard drives from NAS
5. Remove old drives from carriers and replace with new drives
6. Put new drives in carriers and install into NAS
7. Follow manual for reinstalling OS useing stand alone Win2K machine and crossover cable
8. Restore System State Data
9. Restore Data and verify permisions
Quick tip on checking the BIOS version: using Computer Management, if you look under "System Information" , then under "System Summary", you will see the entry that reports:
AMIBIOS (C)2001 American Megatrends Inc., Version 07.00.00
You then want to expand that column a good bit, which will then reveal something like "BIOS Version A08". At least that's what mine shows.
I also have a Powervault 725N with 4x80 GB IDE drives, and would like to increase the available space. The process you describe sounds workable, but to be honest it sure sounds like a lot of work for some disk space. Geesh.
If you elect to proceed with the upgrade, it would be great if you could share your notes -- the more detail, the better!
I would prefer to do this upgrade no more than once, so I'd like to install the largest drives that can be used.
Yes, doing this upgrade is turning into a lot of work. I spent the better part of Friday building a Windows2000 box in preparation. Had to download over 70 security patches and upgrades. geeesh! Despite the work it is at least half the price of completely replaceing the system. My disks came in today, 250GB Baracudas, and I plan on doing the upgrade this weekend possibly. I will be testing a few data backup procedures throughout the week to see what works best. My big concerns at the moment are if the system will recognize the full 250GB (I could only find BIOS A08) and if my data backup and restore will preserve permisions or not. I'll let you know what happens.
Dev Mgr
6 Operator
•
9308 Posts
•
3 Points
1017
0
Posted February 19th, 2008 11:00