UNSOLVED

Sorbukar

updated

19 years ago

S

Sorbukar

3 Posts

0

7413

June 9th, 2007 16:00

Reinstall of 745N

Hi,

I just got a 745N to reconfigure. No-one knows where the resource CD is or what any of the passwords are, so I am going to reinstall it.

I've managed to download the USB Key Preparation Utility (the one that works for real sized USB cards).

Does anyone know if this is everything I am going to need? I don't want to get half way through the reinstall and then realize I am missing something vital and can't back out.

Cheers Andy
  • 136

    0

    Posted June 9th, 2007 18:00

    That's a problem I had not too long ago. Here is what you will need:

    The device ships with a set of 5 disks and the USB key. The disks are as follows:

    Resource CD Version XXXXXX (I ended up with 3.4.9.2 after a call to DELL. :))
    Mirosoft Win Storage Server 2003 w/ SP1 Disk 1-4 (version 3.4.9.2)

    Whichever version you have, they will all match number wise. On each of the SS2003 disks is an image file that the re-installation console will copy to a share it creates on the root folder of the computer you are installing it from. The USB key sets it to look for the computer you copied this to, set a share to that directory and install from those images over a network.

    If you have the storage server disks but no Resource CD, you can manually do what the re-installation console does:

    1. On a client machine, make a shared folder on C: called "NASTemp" (must be at root. Don't make it on the Desktop)
    2. Set permissions on the share (I set them to Everyone with Full Control for both Permissions & Security to make it easy)
    3. Copy the contents of each Storage Server CD directly into this new share. Overwrite any files it prompts you to, as each CD has a copy of the same files.
    3. Make a user called "NASUSER" with the password of "password".
    4. Reboot the NAS unit with the USB Key plugged in after programming it with the USB tool (the name of the computer you are connecting to that has the share should be in the top right box. The IP information is for the NAS unit itself - if not using DHCP make sure that the IP is on the same subnet at the target share computer!).

    It should automatically find the share and start pulling the image files over.

    If you do not have any disks at all, then you will need to contact DELL and have them mailed to you. In that case, just use the disks for everything. The only problem I've ever found with that is that sometimes the permissions of the share aren't set for the network you have. In which case, while the Console is up and waiting for a connection, browse to the folder with Explorer and set those permissions as I mentioned above. That should let it flow freely. When the console is closed, it deletes the user & share itself.


    PS- I did this from memory, so the password of the user may be wrong. You will be able to get the right names by letting the USB key boot process proceed - the error it gives tells you what the name should be (for both the share drive and the name/pass of the user you need to have). You can just correct those bits and re-run the NAS boot from USB until you got it right. ;)

    I would also suggest isolating the connection from the NAS to the client share as best as you can. Even go so far as using a crossover cable between the two, with manually set IP info.

    Good Luck!