I'm running a PowerEdge 1650 with W2K Server SP4 as Backup Server. Connected to that server I'm having an PowerVault 128T with an LTO drive on an Adaptec 29160 SCSI controller. As backup software I'm using ArcServ 2000 Build 1100.
I'm having some throughput problem, I will not get more that 130 MB/min, when I either backup the backup server itself or when I backup a remote server through the network.
The SCSI connection are fine and all seems to be configured correctly.
The problem is that it take about 12 hours to backup 50 ~ 60 GB.
The LTO drive has a throughtput from 15 MB/s - 900 MB/min (theor.), it would be great if i could reach 400 ~500 MB/min.
I would greatly apreciate any hint to help me find out how I can increase that speed.
1. Use the latest drivers and firmware for the scsi adapter. Since DELL does not ship the 29160, you will have to obtain the drivers from Adaptec.
2. Check the OS system event viewer to see if there are any SCSI errors occuring. Errors could be causing excessive retries, thus impacting performance.
3. Do not load any tape class drivers, whereas ARCserve does not use tape class driver. If drivers are loaded, uninstall them. (via OS device manager)
4. During POST, check the negotiation speed at which the drive is operating at.
5. Check the ARCserve activity log file for any errors, such as scsi port errors.
Thanks for you fast reply, in the meantime I did update the SCSI driver to the really really latest version from Adpatec and this helps a lot.
I getting ~450MB/min from localhost and 350 MB/min from remote host through a GB network.
2. A couldn't see any errors in the eventlog
3. When I do remove the tape class driver it will be back after reboot. Does this matter ??
4. During POST, the negotiation seems to be fine.
5. The ArcServ did not report any error about HW problems or such.
Right now, the throughput is not that bad, but I would like to know if we could get even more?
If the drivers reload after reboot, you can try to disable the tape device in the OS device manager.
How much data are you backing up?
Try installing the SCSI adapter on another PCI slot. (I am not sure if the 1650 has more than one PCI bus, but view your documentation). The idea here is to use a PCI bus that is not in use.
dell-richard g
605 Posts
107
0
Posted April 28th, 2004 02:00
Suggestions:
1. Use the latest drivers and firmware for the scsi adapter. Since DELL does not ship the 29160, you will have to obtain the drivers from Adaptec.
2. Check the OS system event viewer to see if there are any SCSI errors occuring. Errors could be causing excessive retries, thus impacting performance.
3. Do not load any tape class drivers, whereas ARCserve does not use tape class driver. If drivers are loaded, uninstall them. (via OS device manager)
4. During POST, check the negotiation speed at which the drive is operating at.
5. Check the ARCserve activity log file for any errors, such as scsi port errors.