UNSOLVED

ngugi

updated

11 years ago

N

ngugi

2 Posts

0

16697

August 11th, 2015 13:00

How to recover a deleted virtual disk on Power vault md3260

Hi,

How can I recover a deleted 2 TB virtual disk on Power vault md3260 whose unconfigured total capacity is 12TB. Only 2TB had been configured and it was erroneously removed and deleted from the disk group

The virtual disk had been attached to server that was created by Power Vault Disk Storage Manager. The entire space is 12 TB but the one available for use was 2TB. One of the disks is set as a hot spare standby about 2 TB.

Am not sure which raid had been used before. When we recreate the virtual disk of course its blank but if scanned with a data recovery software its showing the data but when you recover , the data is not opening i.e the docs, ppts, shapefile etc.

How can I revert to the original virtual disk with good data. Thanks

  • 758

    0

    Posted August 16th, 2015 05:00

    When you recreated the virtual disk you probably overwrote a lot of data you were trying to preserve by triggering a background initialization on the san. Im afraid the data is likely damaged beyond repair at this point.

    Depending on the urgency of the data you would have wanted to either contact a data recovery company (if you cannot risk the data) or see if Dell tech support could do a 'best effort' recovery (meaning they may give it a shot but worst case scenario you could end up in the situation you are in now.)  

    If you were using a dynamic disk pool there is no way you could have recovered this yourself since stripe distribution is somewhat random on these.  If you were using a standard raid level you would need all the specs of the disk group and virtual disk such as raid type, which block numbers the volume started on or ended with, stripe size, and then you would probably have to have re-created the virtual disk by using the storage manager command line so you can specify to not initialize the volume upon creation.

  • ngugi

    2 Posts

    758

    0

    Posted August 16th, 2015 06:00

    Thanks for the information though quite sad to hear. We always thought that the powervault data is quite recoverable as touted. I just wish there was a way in which this can be undone.