I am trying to install Server 2k3 on a PE2850. I am not 100% its related at this point but I am getting a BSOD is 0x7E related to pci.sys address F748E0BF. (I tried with two different floppies to make sure it wasn't the floppy) it comes up when it says its starting windows.
Though if I do not use a floppy for the drivers. It doesnt see the drives. but does not blue screen either. I have tried with usb key it hangs and never loads and there are no errors. slipstreamed drivers don't load the raid card so it doesn't see the disks. I am us nlite for the slip streaming process.
Setup does not always blue screen when the driver is not presented - it will either blue screen or tell you it can't find any hard drives to install to.
You only have three options for giving Windows the driver and installing Server 2003:
Floppy disk ... you apparently have tried this without success. I don't like this method, as floppies are extremely flaky. To do this, you MUST configure RAID in CTRL-M BEFORE attempting to install or even with the right drivers it won't see the drives. If you are having problems with it, try rewriting, redownloading, rewriting, reformatting, rewriting, and throwing the disks in the garbage ... your floppy drive may be faulty too.
nLite ... you also said this did not work for you, but it should. If you have used this method a lot - with success, then don't be insulted by my next question ... do you know how to use it? If you haven't used it successfully before, there are many things that can affect how well this method works. Main thing is to choose Multiple Driver files when choosing the driver, then choose TextMode. You MUST also configure RAID in CTRL-M BEFORE attempting to install using this method.
SBUU ... the Systems Build and Update Utility is a utility designed to assist in the installation of a supported OS. This will assist in configuring RAID and will install all needed drivers along the way. You simply boot to this CD, choose to Install OS, then put in your 2003 media when prompted.
5.1 CD - least preferred. Use only if you don't have SP2, don't want to slipstream it using nLite, and/or don't have a DVD drive. ftp://ftp.dell.com/sysman/OM_5.1_ISM_A00.ISO
I didn't see your post before I posted. I did also mean to mention that if you are using media with NO service packs, you will likely run into problems if you are using too new a driver or are trying to install to too large a drive (or RAID array).
Darkrinn
2 Posts
172
1
Posted May 20th, 2011 18:00
integrating the Service packs fixed the problem so consider it solved