UNSOLVED

lizrdb

updated

3 months ago

L

lizrdb

4 Posts

0

3083

August 20th, 2004 22:00

Dell OpenManage 3.6 and command line interface

Hi!  Does Dell OpenManage 3.6 (or any of the versions from 3.3 to 3.6) include a way to programmatically - via batch file - set alert parameters?  I know the older versions, with FAST and CLI, gave you some possibilities but haven't been able to find anything for the newer versions.

Basically, we would like to remotely set the "beep speakers" alert for certain types of hardware failures (power supply, memory, etc.) via a batch file...

Please let me know if you need any further information!

Thank you!

Liz

  • MichelleT

    2 Intern

    •

    127 Posts

    114

    0

    Posted August 24th, 2004 11:00

    The command that you are looking for is omconfig system alertaction.  If you type that followed by -? then you will be able to see all of the different alerts that can be set for your system, including the actions that can be taken on those alerts.  You may need to use the omreport command to obtain the current settings.

    I hope this information is helpful!

  • lizrdb

    4 Posts

    114

    0

    Posted August 24th, 2004 15:00

    That's perfect - thank you very much for the prompt response!

    Liz