Hi folks
I have got a problem with my PowerEdge 1850: I need Kernel 2.6.12.4 for installing some VServers under Linux.
I tired to install Sarge with Kernel 2.6.8 but there was no driver for the RAID-System :( I also tried to compile a 2.6.12.4 by hand but my debian is missing the megaraid.o module :(
Is there a solution how I could install Kernel 2.6.8 or higher on my PowerEdge 1850.
Well. I have newer used any other command then "apt-get install kernel.imagexxxxx" when it comes to upgrading the kernel. I guess the story is a litte different when you have to "compile the module into the kernel".
The reason is ofcourse that I get "Kernel panic" after running the "apt-get install kernel.image" command.
Well, then you have some learning to do...
You download the kernel source code from www.kernel.org, make sure you have the tools necessary to compile it, gcc for example.
If you google for "compile linux kernel" or something like that, you should be able to find out the rest I think.
There's a learning curve but when you have done it, it's easy the next time.
Useful commands
modprobe -to load modules
lspci -to find out what hardware you have
In the kernel-source top folder
make menuconfig
make clean
make
make dep
make modules
make modules_install
make install
Google is your best friend on this, there's tons of info on how to do this...
BigDuke6_swe
1 Rookie
•
19 Posts
797
0
Posted January 16th, 2006 23:00