Hi guys! I'm new into the world of servers and dell.
So we have a dell t320 with perc h310 having 2 physical disk configured to raid 1. Now I want to have a hot spare. How will i configure it? and is it okay if my hotspare disk has has a higher specs than what my 2 hdds have?
Once the hot spare is configured, will the system start mirroring the contents of those on raid 1? or not?
And correct me if this is wrong, the hot spare will kick in once the system detected a drive failure in one of the disks in the RAID, right? or does it still need some kind of user intervention to kick in the hot spare?
No, the hot-spare will automatically start rebuilding as soon as a disk fails. No data will be synced to the hot-spare until a disk failure - it will be on standby only.
Nielx168
7 Posts
1450
0
Posted February 11th, 2016 04:00
Got it. THanks!
Once the hot spare is configured, will the system start mirroring the contents of those on raid 1? or not?
And correct me if this is wrong, the hot spare will kick in once the system detected a drive failure in one of the disks in the RAID, right? or does it still need some kind of user intervention to kick in the hot spare?