UNSOLVED

astroglide

updated

23 years ago

A

astroglide

14 Posts

0

9984

January 21st, 2004 20:00

a09 bios for pe1600sc does not correct symmpi1 errors

my controller speed was already set for 160 on all devices, so i wasn't able to apply that 'fix'.  after going from a08 (stock) bios to a09, i've gone from about 1 of these event log errors per week to about 5 per day.

  • DELL-Mark A

    2 Intern

    •

    2521 Posts

    404

    0

    Posted January 22nd, 2004 14:00

    Hi,

    May I have the Service Tag Number of your PowerEdge 1600 SC. There may be other solutions based on the hardware installed in your specific system.

    Note: These errors are cosmetic only, and have not been known to inhibit production in any way.

    Thanks for using the Dell Community Forums!

  • astroglide

    14 Posts

    404

    0

    Posted January 22nd, 2004 14:00

    i have a second 2.4ghz xeon (with dell hsf assembly), 2gb of crucial memory (4x512mb pc2100 registered ecc), 2 73gb maxtor atlas 10k iv hard drives, and an adaptec 2940 pci scsi hba (stock win2k3 drivers) with an hp ultrium 215 external lto 100g/200g tape backup drive.  running sbs2k3 with all updates.
  • astroglide

    14 Posts

    404

    0

    Posted January 22nd, 2004 15:00

    they are retail drives.  i have seen you have symmpi1 error-specific firmware updates for hitachi drives, but this one does not appear to address the issue according to the description.

    i would think that this issue can be solved on a hba firmware / driver level, as it appears to occur with all types of disks.

  • DELL-Mark A

    2 Intern

    •

    2521 Posts

    404

    0

    Posted January 22nd, 2004 15:00

    Hi,

    We have firmware available for Maxtor (oem) drives. IF these drives are Dell provided, this firmware may resolve the issue:

    Maxtor Atlas 10K IV, U320, 36,73, 146GB 68/80 pin, Utility, Windows Server 2003, v.1.0, A00
    FileName:  BR66981.exe [877 KB]
    Release Date:  10/2/2003
    http://support.dell.com/filelib/format.aspx?releaseid=R66981

    If these are not Dell OEM drives, I cannot advise using this firmware, I do not know how a retail drive will react.