UNSOLVED

treii28

updated

5 years ago

T

treii28

12 Posts

0

408

April 25th, 2022 10:00

PowerEdge R410 freezing up

A PowerEdge R410 that was working fine for years started freezing up last week. It's running Ubuntu 20.04 and sometimes it will come back. When it did on a most recent freeze, the dmesg log shows the following:

[ 328.721635] mgag200 0000:08:00.0: Video card doesn't support cursors with partial transparency.
[ 328.721636] mgag200 0000:08:00.0: Not enabling hardware cursor.
[ 330.005975] rfkill: input handler disabled
[ 410.086320] [UFW BLOCK] IN=em2 OUT= MAC=01:00:5e:00:00:fb:9e:72:2c:0a:f4:08:08:00 src=192.168.1.85 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=23542 PROTO=2
[ 1530.436833] PM: suspend entry (s2idle)
[ 1531.445958] Filesystems sync: 1.009 seconds
[ 1531.446160] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 1531.448021] OOM killer disabled.
[ 1531.448021] Freezing remaining freezable tasks ... (elapsed 7.007 seconds) done.
[ 1538.455664] printk: Suspending console(s) (use no_console_suspend to debug)
[ 1538.456556] serial 00:06: disabled
[ 1538.456674] serial 00:05: disabled
[ 1538.662938] megaraid_sas 0000:03:00.0: megasas_suspend is called
[ 1538.694420] megaraid_sas 0000:03:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009
[ 1898.587538] megaraid_sas 0000:03:00.0: megasas_resume is called
[ 1898.587559] megaraid_sas 0000:03:00.0: Waiting for FW to come to ready state
[ 1898.587564] megaraid_sas 0000:03:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009
[ 1898.588634] serial 00:05: activated
[ 1898.589593] serial 00:06: activated
[ 1898.642003] megaraid_sas 0000:03:00.0: FW now in Ready state
[ 1898.642020] megaraid_sas 0000:03:00.0: 63 bit DMA mask and 32 bit consistent mask
[ 1898.642170] megaraid_sas 0000:03:00.0: requested/available msix 5/5
[ 1898.642179] megaraid_sas 0000:03:00.0: Performance mode :Latency
[ 1898.642180] megaraid_sas 0000:03:00.0: FW supports sync cache : No
[ 1898.642181] megaraid_sas 0000:03:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009
[ 1898.716630] tg3 0000:04:00.1 em2: Link is down
[ 1898.894009] megaraid_sas 0000:03:00.0: FW provided supportMaxExtLDs: 0 max_lds: 32
[ 1898.894010] megaraid_sas 0000:03:00.0: controller type : iMR(0MB)
[ 1898.894011] megaraid_sas 0000:03:00.0: Online Controller Reset(OCR) : Enabled
[ 1898.894012] megaraid_sas 0000:03:00.0: Secure JBOD support : No
[ 1898.894013] megaraid_sas 0000:03:00.0: NVMe passthru support : No
[ 1898.894014] megaraid_sas 0000:03:00.0: FW provided TM TaskAbort/Reset timeout: 0 secs/0 secs
[ 1898.894015] megaraid_sas 0000:03:00.0: JBOD sequence map support : No
[ 1898.894015] megaraid_sas 0000:03:00.0: PCI Lane Margining support : No
[ 1898.894058] megaraid_sas 0000:03:00.0: megasas_enable_intr_fusion is called outbound_intr_mask:0x40000000
[ 1898.894060] megaraid_sas 0000:03:00.0: JBOD sequence map is disabled megasas_setup_jbod_map 5734
[ 1898.895085] OOM killer enabled.
[ 1898.895086] Restarting tasks ... done.
[ 1898.906316] PM: suspend exit
[ 1898.956501] ata1: SATA link down (SStatus 0 SControl 300)
[ 1898.966605] ata6: SATA link down (SStatus 0 SControl 300)
[ 1898.966703] ata3: SATA link down (SStatus 0 SControl 300)
[ 1898.967442] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1898.968652] ata4: SATA link down (SStatus 0 SControl 300)
[ 1898.970417] ata2: SATA link down (SStatus 0 SControl 300)
[ 1898.972266] ata5.00: configured for UDMA/100
[ 1902.396143] tg3 0000:04:00.1 em2: Link is up at 1000 Mbps, full duplex
[ 1902.396144] tg3 0000:04:00.1 em2: Flow control is on for TX and on for RX
[ 1902.396145] tg3 0000:04:00.1 em2: EEE is disabled

Any idea how to troubleshoot or other suggestions? 

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    287

    0

    Posted April 25th, 2022 20:00

    Hi, thanks for choosing Dell. Please DM me with your service tag so that we can see your warranty. Wish you a good one.

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • treii28

    12 Posts

    273

    0

    Posted April 26th, 2022 08:00

    Seriously? I can't get suggestions without a warranty?!?

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    271

    0

    Posted April 26th, 2022 10:00

    Hello treii28,

     

    I can assist you with some troubleshooting steps.

     

    I will note that Ubuntu is not supported by Dell.

    If it's a OS issue maybe the community can have some input.

    Your PowerEdge R410 supports these operating systems:

    https://dell.to/3MAvYib

     

     

    First confirm you are you up to date on the system firmware?

    https://dell.to/3MugMmz

     

    Are there any diagnostic LED's lit or LCD error messages?

    Page 16-36 Diagnostic indicators:

    https://dell.to/39j30F7

     

     

    Run the built in diagnostics:

    Power up,  Press F10 in top right corner. Once the USC loads, select ‘Hardware Diagnostics’ in the left side and click ‘Run Diags’ in the body.

    a. When the next page loads there will be 2 test available to run:

    b. Select MPMemory. One loop is fine.  Note any messages and continue testing.

    c. Then run the 'Run Diags' select 'Express Test'.  Note any messages and continue testing.

     

    Additionally you can Remove any non original components and check results.

     

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    261

    0

    Posted April 26th, 2022 12:00

    Thank you treii28. I will give Young the service tag

     

    Please note I removed from public forum as that is private information.

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • treii28

    12 Posts

    265

    0

    Posted April 26th, 2022 12:00