
UNSOLVED
Closed
A
abcdef1235
3 Posts
0
750
April 11th, 2023 02:00
Firmware for qlogic 578xx 10GB ethernet card
Hi There
I've recently upgraded my DELL R630 to ESXI 7.0.3. There is a communications problem between the esxi hosts and vCenter. VMware have advised me that I need to upgrade the firmware for the QLOGIC cards from 7.14.18 to at least 7.15.x.
VMware know what firmware version I'm using as they issue the command "esxcli network nic get -n vmnic0" - amongst other things this displays the lin "Firmware version: Storm 7.13.20.0 MFV: 7.14.18"
I then use DELL openmanage to push out the latest firmware to the R640. The latest verison of the firmeware in DELL open manage is 16.10.04 (I guess it uses a different version numbering system from vmware - which is cool) . In any case once I do this I check esxi again to see the firmware - it has not changed. It still says 7.14.18
I then check the DELL support web site and the closest entry I can find that mentions the version 7.12.19 https://dl.dell.com/FOLDER03355299M/3/Network_Firmware_35RF5_WN64_7.12.19.EXE
Does anyone know where I can get this 7.15.x firmware for the QLOGIC 578xx 10G ethernet cards
thanks
Responses (2)
Solutions (0)
abcdef1235
3 Posts
169
0
Posted April 11th, 2023 07:00
HI Chris
thanks very much for your assistance
The manufacturer of these cards is MARVELL - I have found this on their web site - but there are two problems
1. I do not know if its the correct firmware
2. I've no idea how to install it - I've checked the instructions but they make zero sense
https://www.marvell.com/support/downloads.html#

DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
172
0
Posted April 11th, 2023 06:00
abcdef1235,
I can confirm that 7.12.19 is the latest available on the support site, and I am not seeing anything later listed. So what you may need to do is looking at downloading that version from Broadcom/Qlogic directly.
I will research it further to see if I can locate a later version.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!