UNSOLVED

andoven

updated

11 years ago

A

andoven

1 Rookie

•

24 Posts

0

105809

January 22nd, 2016 12:00

BMC OS Watchdog Timer expired - Dell PowerEdge 2850

This error popped up in my computer's HW log yesterday - BMC OS Watchdog Timer expired

This URL said I should update my OpenManage or SUU software:
http://en.community.dell.com/support-forums/servers/f/177/t/19522527

This one said to reboot to fix things:
http://www.tek-tips.com/viewthread.cfm?qid=1458865

I rebooted the server, and will monitor it to see if the error comes up again. Should I proceed to update OpenManage ? On my server support page, there are many OpenManage options to install. We don't have an OpenManage server, and I don't see any OpenManage software installed in Programs / Features.

Dell OpenManage Deployment Toolkit, v.3.5.1, A00
Dell Systems Build and Update Utility
Dell OpenManage Server Administrator Managed Node (Windows - 32bit), v6.5
Dell Management Station Service Pack for Windows, v.5.4.0, A00
Dell OpenManage Management Station, v.5.4.0, A00                     

Let me know what you think.

Thanks!

  • Daniel My

    12 Elder

    •

    6205 Posts

    5162

    1

    Posted January 22nd, 2016 13:00

    Hello

    The BMC watchdog is only intended to be used in conjunction with OpenManage Server Administrator. It uses one of the OMSA DSM services for the heartbeat. If you have never had OMSA installed then I'm not sure how the BMC watchdog was turned on. It is possible to configure it through IPMI, so a monitoring utility or someone may have inadvertently turned it on via IPMI commands.

    You can install OpenManage Server Administrator Managed Node and go to System>Properties>Auto Recovery. If you set this option to none then it should turn off the BMC watchdog. If it is already set to none then set it to any other option, apply, set it back to none, and then apply again.

    If you enable the BMC watchdog then OMSA needs to be installed and running on the system. If you decide to uninstall OMSA then you need to disable the BMC watchdog first by setting it to none.

    Thanks

  • andoven

    1 Rookie

    •

    24 Posts

    5162

    0

    Posted January 26th, 2016 13:00

    Daniel,

    I installed the OpenManage Server Administrator Managed Node on my server, and verified that BMC watchdog is set to off. I truncated the hardware log, and then ran another session of DSET to collect logs on my server.

    Unfortunately, it appears that everytime I create a DSET report, something puts another entry into my ESM/hardware log. Any other suggestions?

    Thanks, Aubrey

  • Daniel My

    12 Elder

    •

    6205 Posts

    5162

    0

    Posted January 27th, 2016 09:00

    Unfortunately, it appears that everytime I create a DSET report, something puts another entry into my ESM/hardware log. Any other suggestions?

    What is the log entry?

    Which log is reporting the watchdog messages? Most operating systems also have watchdogs that can be enabled, so this could be an issue with your OS.

    Thanks

  • andoven

    1 Rookie

    •

    24 Posts

    5162

    0

    Posted January 27th, 2016 12:00

    The ESM (Embedded System Management Log) is where the BMC OS Watchdog Timer expired message appears.

  • andoven

    1 Rookie

    •

    24 Posts

    5162

    0

    Posted January 27th, 2016 13:00

    I ran DSET, and requested only a report, and it showed up under System / Main Chassis.