Optiplex 790 MT PSU Upgrade, and a couple more questions
Hey guys, its me again and im gonna be getting another dell optiplex this time the MT version of the 790, I want to upgrade the power supply in a MT 790 as I will be installing a GTX 1050TI 4GB into it along side with an i7 2600 (I think this should work right?)
I know that the 790 MT has mostly non proprietary fittings and connectors, So should this cooler master PSU fit inside and work with this dell as there is some speculation on things like this.
Also the GTX 1050 TI 4Gb I plan to use with this machine, doesn't have a 6 Pin power connector on the card (even though this cooler master PSU has a 6 pin power connector) and the GTX 1050 TI powers entirely off of the PCIE 2.0 slot, again there is some speculation weather or not that the PCIE slot supplies 150W like typical PCIE 2.0 slots.
Has anyone ever actually done this before? and things like this are never really that clear sometimes.
So I actually bought a GTX 1050 TI and the PSU along side with a optiplex 790 MT and I have done sufficient research and I will hope that everything just fits, when I get all of the hardware arrive I will see if it will work or not and then reply to this post again to inform future people who may see this, and are thinking of going down the same route.
So basically please don't waste your time describing weather or not any of this will work, as I have already bought everything, thanks guys
that is a good question you asked because you were not sure.
790 tech guide p.19/48: max wattage of PCIex16 Slot (BLUE) for MT is 35W, which is substantially lower than standard PCIe x 16 slot wattage (75W) found on gaming motherboard. Optiplex is designed for business not gaming.
Now that 35W may or may not be due to stock 265W psu of MT. It is uncertain when you use a 400W you can expect the slot to suddenly give you max 75W. to be on the safe side, assume Dell tech guide told you that 35W is the real max.
If that is the case the slot would not be able to support a 75W card such as 1050Ti.
i have a feeling due to the poor stock PSU that the PCIE ports cannot supply max power, as you said they are for business and not gaming, but the card i have purchased also has a 6 pin Plug on it that powers straight form the PSU, and that hopefully takes care of the power delivery problem, But i do agree On your point.
Redxps630 is right on 2 counts. 1. The Optiplex 790 Tech Guide does show the PCI-e x16 slot as 35w. 2. Users have been using the GTX 1050 ti in the 790. This has been on the stock PSU.
Dell's 240w-290w PSU's powering 75w GPU's has been on YouTube for years.
Also:
If you still want to upgrade PSU's, that's fine too. You know how PSU's have different voltage outputs on different rails? Make sure the PSU you get has the same as, if not more, power on the 3.3v/5v rails than the stock PSU. Otherwise, it's likely to not work. Many PSU's boast more total power, but skimp on those rails.
Nathanc11
1 Rookie
•
12 Posts
712
0
Posted February 1st, 2021 12:00
So I actually bought a GTX 1050 TI and the PSU along side with a optiplex 790 MT and I have done sufficient research and I will hope that everything just fits, when I get all of the hardware arrive I will see if it will work or not and then reply to this post again to inform future people who may see this, and are thinking of going down the same route.
So basically please don't waste your time describing weather or not any of this will work, as I have already bought everything, thanks guys
Nathan