UNSOLVED

rob360

updated

7 years ago

R

rob360

1 Rookie

•

27 Posts

0

878

November 6th, 2019 08:00

Dell 9020m Micro has M.2 128gb win 10, would like to install a 500GB hardisk

Hello All, I want to add a second drive to my 9020M micro. My 9020m presently has a 128GB SSd m.2 installed with windows 10 ver 1903. . Dell Bios ver. is A01 

I installed the 2nd drive that also has a bootable win 10 already installed and when I boot the system up , I want to keep this second drive with all of its file. On BOOT I get a BLUE bios message at boot , showing 2 drives message is too quick to read! The 9020 boots up normally, but the new 500gb Hard disk does not appear!

I checked bios and the added Hard disk is present in configuration, and the boot sequence shows the M.2 booting first. Boot list is set to LEGACY.

The Bios Sata Operation  is set to RAID, I see other options ,AHCI, At, and disable  but I do not want to delete any of the original M.2 files.

Has any one sucessfully added a second hard disk to the 9020M , if so a step by step would be appreciated.'

Thanks for any assistance.

Rob

  • U2CAMEB4ME

    6 Operator

    •

    6245 Posts

    711

    0

    Posted November 9th, 2019 08:00

    Welcome to the Dell Community  @rob360 

    Did you remove the "Active" partition flag from the 2nd HDD???

    [How to] Make partition Active or Inactive using DISKPART:

    https://kb.paragon-software.com/article/1136

    Best regards,

    U2

  • rob360

    1 Rookie

    •

    27 Posts

    664

    0

    Posted November 12th, 2019 10:00

    Thank you for the info.

    Rob

  • speedstep

    11 Legend

    •

    46969 Posts

    651

    0

    Posted November 12th, 2019 14:00

    This will not work if the M2 is PCI-E instead of Sata.