UNSOLVED

andygrantonline

updated

9 years ago

0

1058

May 25th, 2017 15:00

Broken Heatsink pushpin on Dell C6100 Motherboard. Replacement?

So I was removing an LSI RAID card from a C6100 SFF node/blade, and while unseating the PCIe card, my hand slipped, and I knocked the rear heatsink (I guess it's the GPU) loose and broke the pushpin.

Now, I obviously need reattach this heatsink before deploying the blade.  

Any suggestions as to what the part number is for the pushpin and where I might be able to order a replacement?

Photo:

https://www.dropbox.com/s/vhds0cukj0r9pt0/HeatSink_Pin_C6100.jpg?dl=0

A shows the NON-broken pushpin

B shows the spot where the pushpin goes

C shows the heatsink in place with no pushpin or thermal paste/gel

Also, which gel/paste should I use or does it matter which brand?

1 Attachment

  • DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    610

    0

    Posted May 30th, 2017 07:00

    I believe the thermal paste is Artic MX4. Also, the pushpin can't be ordered individually and you would be required to order the heatsink (part # T4MPW) as a whole.

    Hope this helps.

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • 610

    0

    Posted May 30th, 2017 07:00

    Chris,

    T4MPW Is the CPU heat sink and not what I am looking for. Please review the picture and post again.

  • DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    610

    0

    Posted June 2nd, 2017 11:00

    Sorry for the delay.. The part you are needing isn't available individually from Dell, I only see it available with the motherboard itself.

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!