UNSOLVED

sufianmunir

updated

21 years ago

0

15975

December 18th, 2005 06:00

"Limited or no Connectivity" with Intel 2200BG and Inspiron9300

I get "Limited or no Connectivity" when trying to connect my Inspiron9300 using my Intel2200BG wireless card. Wired connection is working fine.
 
The wireless connection is open and not WEP....error says "UNABLE TO GET AN IP ADDRESS".
 
My other dell 300M connects fine on wireless. Please help as this is VERY frustrating. I just got my Inspiron 9300 2 days ago and when I call DELL software support they are asking for 99 dollars. I am so frustrated.
 
Please help
  • steven troise

    2 Intern

    •

    774 Posts

    407

    0

    Posted December 18th, 2005 09:00

    the problem is the cards drivers . dont let intel software run the card. if you have a blue like icon with waves near the clock right click it. see if there is a option somehwere that says use microsofts client to run the card. Try looking for that saying. I dont really want to mess with mine to help you. sorry about that. just that im using microsofts client to run my card and i havent had problems in weeks. I dont want to mess with mine cause i know my connection will start to drop.but i do know for a fact that somewhere in the intels software you can switch to let microsoft take over the use of the card. intels drivers stink. so make sure you let windows control the card instead. if someone asks u to update to latest drivers dont bother. the new drivers for the card r no good. stay with microsoft. good luck

    Message Edited by steven troise on 12-18-2005 06:11 AM

  • shem007

    12 Posts

    407

    0

    Posted December 18th, 2005 21:00

    You can try the Stevens solution, but I have found with my own experience as well as others with this problem that it does not matter if you are using the intel utility or not, the problem still occurs.  I have been though everything will Dell support with this problem, but they are absolutely no help whatsoever.  They have had me uninstall drivers and reinstall them, reinstall windows, sent a new wireless card, use the intel utility, use the Windows utlility, do this, do that.  Nothing has worked, and I believe there is a much deeper problem that they either know about but are not sharing, or are incompetent and unable to figure it out.  I am sorry Dell, but your Indian tech support is of no help with this problem.  I am fed up with this problem and with Dell.  I am sorry to hear of your problem and am sorry I can't offer anyhelp.  Good luck with the problem, I hope it works out better for you than it did with me.
  • 407

    0

    Posted December 19th, 2005 01:00

    Hello ALL
     
    I agree with what you have said. I am a fairly technical person and I had a hunch Dell support would fail and it did miserably. but this time I am very mad with Dell's quality. I cannot return the laptop as I bought it for someone else otherwise I would have sent it back. If you spend 1100$ on something it is supposed to work.
     
    I think the only solution is to get a new Network card.but If some tech guru can help me please offer a solution.
     
    Regards
  • steven troise

    2 Intern

    •

    774 Posts

    407

    0

    Posted December 19th, 2005 02:00

    i spent close to 1700 for my i9300. best first laptop i ever own. just hate the 2200 card.  i always got connection drops. i bought the extended antennas for the linsys wrt54gs router. and i have microsoft client running the card. i havent lost connection in  months.  if u buy any dell laptop i would first invest in a new card. look into something else other than the internal intel card.
  • shem007

    12 Posts

    407

    0

    Posted December 19th, 2005 10:00

    To be fair, I also purchased the Dell branded wireless card on ebay (Broadcom Chipset, not intel) and had the same problem, although not as often.  When Dell replaced the card, they sent me the 2915abg and had the same problem.  There is something else going on here besides the card or utlility.  -Sam
  • steven troise

    2 Intern

    •

    774 Posts

    407

    0

    Posted December 19th, 2005 11:00

    someone on here also told me it could be service pack 2 and there built in firewalls. 
  • shem007

    12 Posts

    407

    0

    Posted December 19th, 2005 14:00

    I have seen that as well, but I have mine disabled.
  • 407

    0

    Posted December 20th, 2005 18:00

     
    First off Dell's Dell on Call system is not for you. You do not have a "Software Issue". This is apart of the driver hence it is a hardware problem. I do not like using the word problem becuase it is a facet of the driver. I need more info on your problem to correctly adress the issue. 1. What router are you using 2. Is your card in the I9300 set to the same standard as the I300m. (a\b\g network.) 3. Have you released the IP Address in the I9300 (if you have ever been able to the internet). 4. Did you make any settings inside your router. Please answer these questions and I should be able to better help you
  • shoptroll

    6 Posts

    407

    0

    Posted December 22nd, 2005 01:00

    Wow.

    So I'm not the only one having this trouble. I've tried everything listed here already, upgraded the drivers, uninstalled them, used the Intel software, used the Microsoft software, nothing is working either.

    NOTE: This is on a network with a desktop connected via a Netgear Wireless PCI card, and two Gateway laptops connected as well with no problems. Router has been rebooted once in the process just to rule that out.

    Everyone warned me about getting a Dell, but I figured I could fix any troubles that might get thrown at me (I had an eMachine for two years and had no problems). I'm running WinXP Media Center 2005 on this and now that I know where the recovery data is, I'm gonna try my copy of WinXP Pro and see where that gets me (after making a driver disc).

    If this still doesn't work with it, I've got a Netgear PCMCIA G card ready in the wings from my older laptop.

    Slightly annoyed that I have to deal with this right out of the box, and I've had good luck with Intel's PRO 10/100 network cards in the past.

    Message Edited by seneyr on 12-21-2005 09:31 PM

  • steven troise

    2 Intern

    •

    774 Posts

    282

    0

    Posted December 22nd, 2005 02:00

    this is what i would do. i would format the hdd and start fresh with winxp home edition. then dont upgrade the microsofts updates that we get. see how the system works. then if card works good then do updates one at a time. once you get to the point to install service pack 2 check everything out to see if it works then upgrade to sp2. hopefully after that you will narrow down the updates to the culprit. good luck.
     
    i have the i9300 with intel2200 card. so far so good for me. i have no firewalls on it and no wep or any kind of security on it. I have a linksys router wrt54gs with the extended antennas. I have microsoft running or controlling the card. not intels software. i havent lost my connection in about 2 months now. i know that once u put a wep or security on the laptop the card goes nuts.