UNSOLVED

justwondering99

updated

23 years ago

0

1325

January 2nd, 2004 13:00

Centrino & 802.11x miniPCI cards

A couple of questions about Centrino, battery run time, Intel PRO/Wireless 802.11b mini-pci cards, and Dell TrueMoblie 1400 802.11 a/b/g miniPCI cards.

 

According to Intel & Dell ( http://www1.us.dell.com/content/products/features.aspx/featured_centrino?c=us&cs=04&l=en&s=bsd ), a 'Centrino' machine is a combination of Intel parts - Pentium M processor, Intel 855 chipset, and Intel 802.11b wireless ( that's the only Intel minPCI wireless card that's currently shipping).

So if I configure a Latitude D600 with a Dell TrueMobile 1400 miniPCI, technically speaking (or is that marketing weaseling) I no longer have a 'Centrino'-based machine -which may or may not be an issue to me.

 

Q1. Say I buy the D600 with the Intel 802.11b installed and later decide to purchase a TrueMobile 1400 card, is the TrueMobile card a pin-for-pin physical replacement? ie. simply remove the Intel miniPCI card and its drivers, install the TrueMobile 1400 in the same slot, connect the antenna(?), and install the drivers? Are there any pictures of each of these cards anywhere on the Dell site?

Q2. Does using a TrueMobile card vs. the Intel 802.11b card reduce battery run-time (assuming same usage)?

Q3. Can I even install a TrueMobile1400 card as an 'after purchase' user upgrade later? I'm thinking specifically of the built-in antenna in that a properly tuned antenna for 2.4Ghz (802.11b/g) use has to be different than one for 5Ghz (802.11a) use? In other words, is the built-in antenna configured for both frequency bands at the Dell factory or does Dell only install an antenna configured for the 802.11 band we choose at purchase time?

Q4. Can anyone here describe the physical steps needed to do a minPCI wireless card swap like I outlined in Q1 above?

TIA

  • MrSnivvel

    18 Posts

    111

    0

    Posted January 2nd, 2004 19:00

    Q1: The TM1400 and Intel 2100 are both of the Mini-PCI form-factor and are "swappable".

    http://accessories.us.dell.com/sna/ProductDetail.aspx?category_id=5823&k=&mnf=694&brandid=&prst=&prEnd=&sku=430-0485&mnfsku=&SearchType=&Page=productlisting.aspx&spagenum=1&Pageb4Search=&InStock=&items_per_page=50&orderby=&mnfname=&brand=&SubmitSearch=&image_flag=True&refurbished=&c=us&l=en&cs=04&iCompatid=

    http://accessories.us.dell.com/sna/ProductDetail.aspx?category_id=5605&k=&mnf=&brandid=&prst=&prEnd=&sku=430-0497&mnfsku=&SearchType=&Page=productlisting.aspx&spagenum=1&Pageb4Search=&InStock=&items_per_page=50&orderby=&mnfname=&brand=&SubmitSearch=&image_flag=True&refurbished=&c=us&l=en&cs=555&iCompatid=

    The TM1400 is not available to purchase as a seperate component on the website, may need to talk directly to a sales rep.

    Q2: Specs for the TM1300 & TM1400: http://docs.us.dell.com/docs/network/p44970/en/specs.htm
    Specs fot the Intel 2100: http://docs.us.dell.com/docs/network/r64916/en/specs.htm

    Q3: The antennaes are the same, the are a part of the motherboard.

    Q4: The basic answer is: First, remove the batter and AC power sources. Second, there will be a cut out on the bottom of the system with a screw labeled "C", that is where the card resides. Third, disconnect the antennaes by using on the gold connector heads, NOT the antennae wires. Fourth, spread the two clips coming from the edge connector running up the side of the card, away from the card, the card will then pivot up at about a 30-45 degree angle. Fifth, pull card out. Do the reverse to put the other card in. These steps are also found in the Service Manuals for all the systems in the Reference -> User Guides -> (System Type) of the Support.Dell.com site.