I have tried using the normal networker user (not save set restore), but the folder in question is quite large, about 800GB in size. The typical restore fails after about a day, leaving 0KB files. Made the problem worse. I created a temporary restore location on the NetApp that I can redirect to. But it still fails - can't finish. I can do small subdirectory restores, so I don't think it a bad tape issue. Nothing in logs says anything about unreadable media, I think it is just taking too long. When I choose saveset restore, the folder selection doesn't stick (I don't need to restore the whole save set, just one directory, but it doesn't stick. I am afraid to use the GUI method for fear of overwriting good data with more 0KB files. Here is the command line I am looking at using, would like some affirmation that it looks correct.
In case interested, here is the tail end of the output log from networker user after it stops restoring files.
____First 440 lines ommitted:
42617:nsrndmp_recover:ssid'920076825': NDMP Service Log: RESTORE: Fri Aug 9 02:28:43 2013 : We have read 27373877 KB from the backup.
42617:nsrndmp_recover:ssid'920076825': NDMP Service Log: RESTORE: Fri Aug 9 02:34:23 2013 : We have read 27509384 KB from the backup.
42617:nsrndmp_recover:ssid'920076825': NDMP Service Log: RESTORE: Fri Aug 9 02:39:23 2013 : We have read 27720996 KB from the backup.
42617:nsrndmp_recover:ssid'920076825': NDMP Service Log: RESTORE: Fri Aug 9 02:44:23 2013 : We have read 27738325 KB from the backup.
42617:nsrndmp_recover:ssid'920076825': NDMP Service Log: RESTORE: Message from Read Socket : Connection reset by peer
42617:nsrndmp_recover:ssid'920076825': NDMP Service Log: RESTORE: RESTORE IS ABORTED
42738:nsrndmp_recover:ssid'920076825': Data server halted: Failed to connect to the mover. 42617:nsrndmp_recover:ssid'920076825': NDMP Service Log: Connection or IO Error.
42856:nsrndmp_recover:ssid'920076825': NDMP data server has an internal error. 42871:nsrndmp_recover:ssid'920076825': Error during File NDMP Extraction. 42840:nsrndmp_recover:ssid'920076825': NDMP recover failed. 42880:nsrndmp_recover:ssid'920076825': Error during NDMP recover 16279:recover: NDMP retrieval: child failed with status of 1
With NA (and SSID restore in general), there might be period of idle time which may be seen as idle connection and killed by OS, network or appliance - which appears to be the case here. Where exactly does this happen, I have no idea, but by checking data path and checking with owners of these points about setting, you should be able to trace it in some log.
turbo84gn1
15 Posts
599
0
Posted August 13th, 2013 09:00
upon further reading, looks like my command line should look like this:
nsrndmp_recover -c PLPSNETSP002 -s PLPDRETSP001 -m /vol/restoretmp -S 920076825 /vol/team1/engineering/dsgn_eng