UNSOLVED

dsakhuja

updated

16 years ago

D

dsakhuja

24 Posts

0

558

January 18th, 2011 03:00

Help needed to design a backup policy

Hi

We are using Networker 7.6.1 with Netapp VTL as primary backup device & HP tape library as cloning device.

We want to define a policy that for 3 months the data should reside on the VTL & should remain on the physical tape for 3 years.

The data should be browsable for every day but the tape usage is one of the concern. Can some one suggest a policy so that we can minimize the tape usage to achieve this.

Thanks in advance

Regards

Dinesh Sakhuja

  • masonb

    445 Posts

    244

    0

    Posted January 18th, 2011 03:00

    Dinesh,

    just to clarify a few points: -

    1. Do you need the data detail for the clone also i.e. clone browsable for 3 years also?

    2. Can you expand on why "tape usage is a concern"?

    Regards,

    Bill Mason

  • David_Hampson_90e289

    2 Intern

    •

    243 Posts

    244

    0

    Posted January 18th, 2011 05:00

    I'd echo Bill's comment, why is the tape usage a concern?  How much do you want to minimize the tape usage?  You could possibly do this by only keeping long term copies of full backups and keeping your incrementals for the same period that you keep your disk backups but you have the potential to lose some backup data.

    If you are referring to the disk (VTL) usage being the issue is this because you expect to be close to capacity of the VTL?  Some suggestions in this case - minimize the number of pools you are using; don't have too many virtual devices as this may lead to more virtual media in an appendable state and a greater spread of savesets on those media (and thus an extended time for them to expire), use a smaller virtual tape format if possible.