Hi guys, i have a very expensive problem. From the information that i've gathered, you need a monitor that has HDCP in order to hook up your ps3 to it. Well i just bought the Dell E228WFP (which says it has HDCP for the DVI port on the website) a week ago. I also got a HDMI > DVI cable to hook up to the monitor. Now when i finally hooked everything up, i get a screen that says "3 : Digital Input Cannot Display This Video Mode Optimum resolution 1680X1050 60Hz." I thought i did EVERYTHING right, and i get this screen! Can someone PLEASE help me with this problem? Am i just stupid, or do i just have bad luck? Would really appreciate the feedback.
its possible that the ps3 is configured to allow 1080p signals, which your monitor won't do (only 720p). go into the ps3 display settings and uncheck the 1080i/1080p option (you'll need to configure it in manual mode rather then automatic). start there, although i believe the movie playback should have noticed that it can only do 720 and switched to that.... now that you mention it, i had the same problem with the 2407 the one time i tried playing a 1080p movie (which its supposed to support). i remember clicking on my controller random button (cuz i was 'happy' to see the error) and then it started playing, although it was stretched out 1080p (i.e. 1200)...
when i tried to manually change the settings, they wont' change and it goes back to 480p. I think my problem (well i'm hoping it's my problem) is that the monitor is DVI-D and i only got an HDMI > DVI cable instead of an HDMI >DVI-D cable. i ordered a new adapter so i'm hoping this pans out.
There are three variants of the DVI interface; DVI-D (digital only), DVI-I (intergrated digital and analog) and DVI-A (analog only). DVI-I is DVD-D plus extra conductors for the analog signal. Since DVI-A is rarely used, I think you will find that the term DVI usually implies DVI-D.
HDCP sends an encrypted signal over a (digital) DVI or HDMI connection. From what I've read it seems that some HDMI to DVI converters may not pass this signal correctly.
araczynski
30 Posts
579
0
Posted August 6th, 2007 19:00