UNSOLVED

Illjazz

updated

16 years ago

I

Illjazz

43 Posts

0

12163

August 11th, 2010 14:00

Flat-panel monitor compatibility.....

Yeah, I know this gets asked a lot, but the other topics i've searched never really give the answer that satisfying, but that might be because I'm not thinking about it the right way. I want to get a flat-panel LCD monitor for my GX270 tower (hopefully a Dell Ultrasharp), but I'm afraid it won't work. It seems all that's necessary to have is just the VGA port, since I have an older (perhaps the original) video card and so there's no DVI port. Is this right? Other specs are in my sig.

So, I might as well ask this now too, but what type of video card upgrade would you recommend for this system as well? Thanks for any suggestions.

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    441

    0

    Posted August 12th, 2010 20:00

    First, change the resolution and tell us what is the maximum. This will help us choose a monitor. What size monitor? How much do you want to spend? If you decide to upgrade, these low end AGP video cards should work.


    DELL-Chris M (old account)

    #IWork4Dell

  • Illjazz

    43 Posts

    441

    0

    Posted August 17th, 2010 09:00

    Sorry to take so long to reply. I appreciate the help.

    The settings won't let me choose beyond 1280 by 1024, and the monitor showed all the resolutions up to that pretty well. My graphics card, I believe, is an Intel(R) 82865G Graphics Controller. I've been looking for basically another 17" just because I don't want to spend too much, but I might buy a 19" or higher if I could find a good one used.

  • Illjazz

    43 Posts

    441

    0

    Posted September 6th, 2010 16:00

    Recently when I installed a program, my monitor popped back into the 1024x768 setting after restart, so maybe that's the limit. I have seen some 19" screens from the Dell Ultrasharp 1900 F-series (if that's how you refer to them), but I noticed that the actual VGA connectors on the end of the cables seem a little smaller than what I'm used to. Do (relatively) newer VGA cables not fit into the same sockets as the older (circa 2003-4) VGA cables?

    I also discovered that if I want to upgrade my video card, I may need to upgrade the power supply too, so the video card upgrade may be put on the back burner for a little bit.

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    441

    0

    Posted September 7th, 2010 06:00

    Do (relatively) newer VGA cables not fit into the same sockets as the older (circa 2003-4) VGA cables?
    * Yes.

    I may need to upgrade the power supply too.
    * Those video cards I linked to should work with your current power supply.


    DELL-Chris M (old account)

    #IWork4Dell

  • Illjazz

    43 Posts

    441

    0

    Posted September 11th, 2010 21:00

    Wow, ok. Thanks. I'm glad I know that now.

  • 441

    0

    Posted October 22nd, 2010 17:00

    Recently when I installed a program, my monitor popped back into the 1024x768 setting after restart, so maybe that's the limit. I have seen some 19" screens from the Dell Ultrasharp 1900 F-series (if that's how you refer to them), but I noticed that the actual VGA connectors on the end of the cables seem a little smaller than what I'm used to. Do (relatively) newer VGA cables not fit into the same sockets as the older (circa 2003-4) VGA cables?

    I also discovered that if I want to upgrade my video card, I may need to upgrade the power supply too, so the video card upgrade may be put on the back burner for a little bit.


    Thanks for your analysis! This is what I'm looking for.