UNSOLVED

badugah

updated

20 years ago

B

badugah

6 Posts

0

8508

September 6th, 2006 03:00

dell 24" Now has presets?!!!!

Ok so i recieved the replacement 2405fpw replacement for my "defective" unti today and the first thing i noticed is that the replacement unit how has Presets in the Settings panel? there is a PC preset and a Mac standard Preset!!!how come my first monitor doesnt have this? what gives? is there a firmware update?
  • badugah

    6 Posts

    188

    0

    Posted September 6th, 2006 22:00

    Well i had a 2405 and so i assumed the replacement i got was a 2405. Also both monitors look identical. Dont the 2407's have the silver trims and back panel? i will check my SN. How do i check for the A03 or A02. Finallt id it IS a firmware update where to find it.
  • all the facts

    2 Intern

    •

    983 Posts

    188

    0

    Posted September 6th, 2006 22:00

    Those presets are included in the 2407FPW. PC & MAC.

    If you see these presets in a 2405, and your sure it's not a 2407 (look on the back), then it's probably a firmware update for the 2405. Didnt know Dell had any 2405's left. Replacements for outdated older models are usually replaced with a newer current model 2407 A03's or A02's. If it is a 2407 see if it's an A03 or an A02 version.

    Good day.
  • all the facts

    2 Intern

    •

    983 Posts

    188

    0

    Posted September 7th, 2006 01:00

    Look for the model number on the box you recieved it in, 2407 A02 or A03, it should also state if it was assembled in China, Czech or where. And if it's a 2405 it should be on the shipping box.

    2407 has silver back, you are correct.

    There is a sticker near the jack panel on the back.

    If yours is a 2405, maybe an you received an updated firmware version.


    How to Find the Firmware and Panel

    This works for my 2407 A02's

    As a reminder, Dell screens allow you to access the hidden ‘factory’ OSD menu to find out some additional information about your screen. Here is how to do it, it will become important later on…

    1- Turn off your screen, while your computer is still on.
    2- Press simultaneously the 'Menu' and '+' button of the screen.
    3- While holding the 2 buttons, press now the 'Power' button. Now let go.
    4- Once the screen in ON, unpress the 3 buttons.
    5- Just press the '-' button.
    6- Press menu again to exit hidden menu.


    It might be that A02 improves the banding problem a little further, but we will need to wait for further reports
    to be sure, especially from people moving from A01 to A02.
    The firmware and panel details remain the same however in A02, and this is the history of the 2407WFP evolution:


    A00 - V1B11, LTM240M2
    A00+ Interim update - V1B15, LTM240LM2
    A01 - V1B15, LTM240L2
    A02 - V1B15, LTM240L2

    Good day!
  • badugah

    6 Posts

    188

    0

    Posted September 7th, 2006 05:00

    I checked the back where the SN is. my monitor is a 2405fpw but with firmware revision A05. that hidden firmware menu didnt work for me. is it possible to update the firmware on a model that isnt A05?
  • all the facts

    2 Intern

    •

    983 Posts

    188

    0

    Posted September 7th, 2006 12:00

    Dell can update firmware, but consumers can not flash new firmware versions , at least not on the 2407's. Has to be done by Dell. That's why so many are upset that they have to send in the monitors to be flashed and you won't or may not get the same one back you sent in. You would be back to the luck of the draw and another panel could have other issues you never had in the one you sent in. These LCD panels should be made consumer friendly, so owners can flash them with new firmware versions and don't have to send them to Dell. Many other products are.

    Good Day!

    Message Edited by all the facts on 09-07-200608:58 AM