UNSOLVED

teamapproach

updated

16 years ago

0

36234

August 26th, 2010 14:00

Studio Laptop 1737 will no longer accept CD/DVD disks

My Dell Studio Laptop 1737 will no longer accept disks. When they are inserted, the disk makes a repeated clicking sound for 5 seconds and then ejects the disk.

This laptop runs Vista and the drivers appear to be uptodate. If a reboot and go into SETUP without Vista, I get the same symptom so I assume that this is a physical problem and not software.

The laptop is just over a year old and has been static on a desktop for the period and the CD/DVD drive has rarely been used and so I am suprised to see a failure of this type. Does anyone have any suggestions?

  • 327

    0

    Posted August 26th, 2010 17:00

    My Dell Studio Laptop 1737 CD/DVD drive appears in Device Manager as PLDS DVD+-RW DL-8ATS ATA device and which implies that the device is available and the driver is loaded.

    No error messages appear.

    Someone has reported the same problem at

    http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/dfde5c83-b6d1-4004-add2-7b05afeff2bf 

    My Dell Support Drivers and Downloads page has firmware for "OPTIARC AD-7640S 12.7mm SATA Slotload 8X DVDRW " but when I download, unzip and run the programs says "No compatible device is detected!" and I therefore understand that this is for some other device.

    Dell has listed no other download related to CD/DVD drives for my computer.  

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    327

    0

    Posted August 26th, 2010 17:00

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    338

    0

    Posted August 26th, 2010 17:00

     teamapproach,

     

    Did you try the upper and lower filters approach or the fix from Microsoft?

     

    Did you recently reinstall the operating system?

     

     

    Rick

  • 338

    0

    Posted August 26th, 2010 18:00

    thanks for your help.

    I tried the Microsoft utility which tries to read the disk, but the disk will not stay in the device.

    I did not try the registry filter fixes because, I am not getting the noted error message. Device Manager reports that the device driver is loaded with no problems.

    There is another reference to the same problem at

    http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/30ebe2c0-2c65-4aa6-8880-008fc0c47fe5 

    which implies that a number of people have the same problem and that it appears to be a defective device.

    It is possible that I never did use the CD/DVD drive and that it came with a defective device, but my computer is past the warranty period.

    Given that the drive ejects all disks after a 5 second repeated clicking noise even in setup mode when windows Vista is not loaded implies to me that there is no software fix for this unless there is some hardware reset utility or firmware update.

    I have tried powering down, removing the battery for a few minutes are restarting only to get the same problem.

    I am able to find manuals for a similar device on the Dell website, but not this particular device, so I do not know if I can remove the device and do some sort of hardware reset.

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    338

    0

    Posted August 26th, 2010 19:00

     teamapproach,

     

    If my memory serves me correctly, I also had issues with my cd/dvd drive in my Studio 1737. I cannot remember if it was with Windows Vista 32-bit, Windows Vista 64-bit or with Windows 7 64-bit. I deleted the upper and lower filters, restarted my computer and it reinstalled with no problems.

     

    It still works to this day with no problems.

     

     

    Rick

  • tazea

    3 Posts

    338

    0

    Posted September 25th, 2010 08:00

    Hello,

    I have a Studio 1737 operating with Windows Vista 64-bit.  I also have an issue with the cd/dvd drive clicking and ejecting the disk after about 5 seconds.  I've read the other posts and am willing to delete the upper and lower filters, restart and reinstall...but I'm not sure where to begin.  Will you please provide guidelines?  

    Thank you. 

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    338

    0

    Posted September 25th, 2010 09:00

  • tazea

    3 Posts

    338

    0

    Posted September 25th, 2010 11:00

    I have not received any error messages.  Does this make any difference?

  • PudgyOne

    11 Legend

    •

    30315 Posts

    •

    106638 Points

    338

    0

    Posted September 25th, 2010 14:00

    tazea,

     

    The first one tells you how to delete the upper and lower filers. When you restart, the new hardware wizard will find and install.

     

    The second one, from Microsoft, if you click on the fix it, it will do it automatically, then restart and you should have it back, hopefully.

     

     

    Rick

  • tazea

    3 Posts

    90

    0

    Posted September 25th, 2010 17:00

    Well, I deleted the upper and lower files, rebooted, then went to the Microsoft link and clicked on "fix it".  I still have the problem.