UNSOLVED

floremin

updated

17 years ago

Closed

F

floremin

3 Posts

0

41340

July 10th, 2005 13:00

Resume from hibernation slow (Inspiron 6000 and 1100)

I have a 2 months old Inspiron 6000 running Windows XP. When I first got it the hibernation worked perfectly and resume was quick - about 1 minute after I press the power button. Lately, it takes about 5 minutes or more to resume from hibernation.

After the text mode screen "Resuming Windows" with the progress bar at the bottom, I get black screen and it stays like that for 4-5 minutes after everything resumes normally. While screen is blank it seems that hard drive is being accessed every 3-4 seconds for a split of second - I can hear short drive access sounds, but the HDD LED doesn't come on, or it can't be seen.

Same thing is happening on my Inspiron 1100.

Also, it seems that the longer it stayed in hibernation, longer it takes to resume.

Is this a Win XP configuration problem, a hardware issues, or ...

Thank you for your help!

Floremin.
  • Chpsk8

    8 Posts

    1879

    0

    Posted July 15th, 2005 01:00

    I have this exact problem on my Inspiron 5150. I use FN-ESC to hibernate and at first it worked great. Lately, and I mean in the last 3 months, it has been extremely slow to come alive. I have changed the battery, and tried keeping it plugged in when trying to wake it up and nothing works. Once it is up and running I can put it to sleep, and if I come back in an hour or so it is fine and wakes up right away. But if I leave it all day or overnight it can take me 5 minutes to get it to wake up again. This is very frustrating because my wife gets easily frustrated and just reboots it in the morning losing anything I had up. :(
    Dell tech support said to reset the bios, which I tried, but I'll admit I don't think it actually reset. I've downloaded all the Windows updates and run the Dell updater to no avail. I have changed the battery to a brand new Dell battery to make sure it was getting adequate power. Because it gets worse with time I feel that it is a power management hangup.

    Somebody must have an answer to this issue, we can't be the only two that are having this issue.
  • Chpsk8

    8 Posts

    1879

    0

    Posted July 15th, 2005 12:00

    Tap tap tap... helllooooo....

    I'd love to get this issue answered, is there anyone that is able to figure out whats going on with these three systems? Funny that its' three different hardware platforms.

  • floremin

    3 Posts

    1879

    0

    Posted July 16th, 2005 01:00



    @Chpsk8 wrote:

    Tap tap tap... helllooooo....

    I'd love to get this issue answered, is there anyone that is able to figure out whats going on with these three systems? Funny that its' three different hardware platforms.






    Obviously it's not the hardware issue, or at least it's highly unlikely.

    Do you use wireless network card?

    I'm not sure but I think if it's off at the boot time, or if you turn it off (Fn+F2 on my Inspiron 6000) then it boots up fine.
  • Chpsk8

    8 Posts

    1879

    0

    Posted July 16th, 2005 02:00

    Well for a year and a half everything was fine, then one day I startede having this problem. I figred it might be battery so I bought a new one and that didn't help. I don't think shutting off the wireless card would do anything, but its' worth a shot. I think it's got something to do with power management. Since we can get them to come back up if they are only down for a short time, but when they are down overnight or more than 6 hours it can take up to 5 minutes to get them to come alive again.
    I didn't do any updates or add software when I started having the issue. I do have Dells auto update runnig so I don't know if something updated on me. I have read back through the forum about 6 months worth of posts and see that there are many similar instances, but no solid answers. Somebody out there has to have fixed this sucessfully.
  • GenieCiel

    6 Posts

    1879

    0

    Posted July 18th, 2005 07:00

    Same problem here.  My Inspiron 1100 won't get back from sleep at all, well, mayby I am not patient enough...   We run XP auto update from MS but have to confirm installation so we know this started to happen after some patch installation from XP.

    This starts to get on my nerves...

  • floremin

    3 Posts

    1879

    0

    Posted July 18th, 2005 11:00

    Is "sleep" StandBy or Hybernation?

    I've read posts about not getting back from StandBy and the solution involves reverting video drivers.

    As for hybernation, there is still no solution, but I think it's software (Win XP) related. I'm still investigating the wireless card possibility and I'm having some success when I disable it - system boots normally, but I still can't say for sure, as I never confirmed the circumstances under which the "lazy" boot occures.
  • Chpsk8

    8 Posts

    1903

    0

    Posted July 18th, 2005 13:00

    I have the problem coming from Standby or Hibernation. If I put it in Standby, and use the computer soon after (meaning 10 minutes to 3 hours) I dont' seem to have any issues. If I let it go overnight it takes forever or just won't come up. My thought is that somewhere along the line the computer is going from Standby to Hibernate and then not coming up.
    I've had my 5150 for around 2 years and it started acting up with this about 4 months ago or so. I saw a post about rolling back the video drivers, but it looked like it was for a different computer, and different video drivers, not the one listed on my computer. If I roll it back, can I revert to the latest the same way, or do I need to go seek out that driver again.
    I did have the problem before and after Service Pack2 update, and I have replaced the battery thinking that it was getting old and causing the issue. Neither helped.
     
  • GenieCiel

    6 Posts

    1903

    0

    Posted July 18th, 2005 14:00

    Well for my case, it would never come back from StandBy (I dont use Hybernation) and the black screen would stay there for ever (ok, I tested 10 minutes).

    I decided to install VNC because I was tired of hard rebooting the machine everytime my wife was closing it's lid ;-)

    VNC works well and the PC behaviour is as design exept for the video not beeing output to the LCD or CRT video...

    I might try to revert the video driver even if it doesn't make sense since they are the latest and they did work "before"...  Could anybody get that post for me?

    Thanks!

  • Chpsk8

    8 Posts

    1903

    0

    Posted July 18th, 2005 15:00

    What is VNC? Do you have a link?

     

    Are you saying if you go into standby and try to start again within an hour that it won't comeup? Thats a little different than mine,but probably the same issue.

    As far as rolling back the driver, go to My Computer, navigate to the hardware, find the driver, right click to Properties. Once you've found it there is a button to push to roll back the driver to the last revision. The post I read said that the new driver wasnt' compatible and it helped his problem.

  • GenieCiel

    6 Posts

    787

    0

    Posted July 19th, 2005 13:00

    Hello and thanks...

    I will try to revert the driver if it is possible.

    FYI VNC is a programme like PC Anywhere and is designed to take control of a computer from a remote other machine.

    I will post more news if it helped my problem