
UNSOLVED
Closed
PCI video card in D/Dock Expansion Station
Has anyone gotten a pci video card to work in the D/Dock Expansion Station and if so, what kind?
I tried an ATI FireMV 2200 but then the laptop wouldn't even finishing booting through it's bios and nothing showed up on any screen. I know the video card works as I tried it in a desktop to be sure. I also know the pci slot in the expansion station works as I successfully checked it out with a pci firewire card.
Thanx for any help.
Responses (5)
Solutions (0)
- I looks fine. I'm running 4 Dell 24" monitors with my Latitude 810 now. 2 on the ATI FireMV 2200, 1 off the video passthrough on the docking station and one on a VTbook 32mb video pccard slot card. And the screen on the laptop makes 5 screens. The only problem I have is it won't boot with the pc card in the slot so I have put that in after I'm in Windows. Sometimes I have to go into display properties to enable the VTbook card but sometimes not. The VTbook card seems just as fast as the ATI unless the screen is rotated to a vertical orientation and then the VTBook is slow. So I don't use that screen vertically. I'm going to get a FireMV 2400 when I figure where to put two more screens. Need to find an articulating arm stand that will handle a 24" monitor.
- Hi mhcooper,
I have the VTBook in a Thinkpad T30, and in that laptop at least, I would say it "looks fine" but does not work fine, since the screen running on the VTBook is noticeably slower than the one running on the internal graphics card. It might be a problem with the Thinkpad's Cardbus slot, though.
Do you notice a difference in speed (2D) between the monitors that are run off the internal video card versus the PCI/VTBook cards?
Matt

mhcooper
4 Posts
549
0
Posted November 9th, 2005 03:00