UNSOLVED

atexan01

updated

21 years ago

Closed

A

atexan01

1 Message

0

4740

December 13th, 2005 19:00

Inspiron 9100 and ATI 9700 - No Video at high resolution

Inspiron 9100 with ATI Radeon 9700
XP Pro SP2
 
I have found a couple of posts that are similar to my issue but no resolutions.
 
 
In summary - seems that the LCD will no longer support resolutions above 640x480.
 
On boot I get Dell splash screen, XP splash screen OK. When it is supposed to switch to the blue login screen instead the LCD goes BLACK and refuses to show any video until reboot.
 
In 'Safe mode' and 'Enable VGA Mode' (640x480) get video and I can login to get the desktop. When in safe mode, if I change the resolution, DPI or monitor frequency, the LCD goes black and will not come back.
 
External monitor will show video at any resolution in any boot mode.
 
Ran all the DELL LCD and Video diagnostics from the F12 screen and all pass.
 
Uninstalled and re-installed the ATI drivers - no change
Updated ATI with latest (8/05) from Dell support - no change
Update BIOS to A06 - no change
Checked the little pin and it works fine
 
Read other posts that OS reload didn't fix it so I don't want to run down that path.
 
Anyone ever come up with an answer to this one. Right now this laptop is just a big paperweight.
  • Akba

    7 Posts

    108

    0

    Posted December 23rd, 2005 14:00

    I had a similar problem with my Inspiron 9200. The suspend switch was the culprit in this case. In the 9200 the suspend switch is a reed switch instead of a mechanical one ( think 9100 too should have a reed switch). visit the following url in which I have replyed on how i fixed my the problem. You too could do the same if your symptoms match. ..  http://forums.us.dell.com/supportforums/board/message?board.id=insp_video&message.id=144223
     
    hope this helps.
    (P.S.  Check for the magnet to confirm weather 9100 has a reed or a mechanical switch)