
UNSOLVED
Closed
Inspiron 8200 with failing ATI Radeon 9000
A co-worker asked me for help with her Inspiron 8200. She has minimal tech knowledge. I have a tad bit more. Her Inspiron would not boot up at all. The power button activated little activity for only a few seconds and then it would just shut off. I reseated and rearranged the memory cards (Sockets A and B each contained a 256MB, DDR, 266MHz memory board for 512MB total). I discovered that one of those memory boards was bad, and once removed, the notebook powered up just fine and is running happily on just 256MB of memory. Unfortunately, the Inspiron is not as happy with its 64MB of video memory. The 8200 powers up with a seriously distorted video display. The distortion begins immediately upon power up, continues right through bios POST, and straight into Windows XP. Dell Diagnostics reports that video memory fails every test. The rest of the Inspiron's components test good.
Is it possible that the failing memory board caused the ATI Mobility Radeon 9000 video board to go bad? Or do you think there might be something happening in the 8200 that caused both the memory card and the video adaptor to fry? Would it be feasible to replace both of the failed components? If so, are they still available for purchase?
Thanks!
Responses (2)
Solutions (0)
- Thanks for your reply! I'm sorry to hear that you are having problems as well. I am having very little luck finding a replacement video board. What I have found is either defective or way too expensive (for a used component). The Inspiron 8200 is a beautiful laptop. It should be living a long and productive life, with part of that life being provided through reasonable-priced replacement parts. Instead, it may soon become a beautiful piece of trash. I don't think I will ever understand the "throw away" mentality of the marketing world.The woman who owns this 8200 has already abandoned it. She went and replaced it with a brand new HP machine, telling me that she was too afraid to buy another Dell.

Jerry Park
695 Posts
375
0
Posted September 25th, 2006 18:00
Seems to be related to heat -- the display will be fine for a few moments (up to about a minute when starting cold), and will then fail.
Good luck finding a replacement. You would think parts for popular laptops would continue to be made as long as the units were in use, but that doesn't seem to be the case.